Description
Product Description:
TEREK pump adopt aluminum alloy and stainless
steel materials ,Air boosters are suitable for the oil free
compression of air, RTE Series are single acting and single stage
driven type. This series
of pump driven piston diameter is **0 mm.
TEREK pumps
are air driven pressure from 3 to 8bar (*3.5 to **6 psi) by the
normal air compressor. Basically the theory of operation is similar
to a reciprocating amplifier where control of the piston at the end
position is regulated by a pilot operated way valve. Its function
is to increase the air pressure in the working system by 6
times.
It's such a device that uses compressed air as
power source, air driven refrigerant pump as pressure source and
refrigerant(cool medium) as working medium, to get the
corresponding high pressure value through regulating air drive
pressure; and the ratio of output pressure to air drive pressure is
6:1. When air drive pressure and outlet pressure reach balance, the
refrigerant pump will stop pressurizing, and output pressure will
be stable at the preset pressure, so it has such features:
explosion-proof, output pressure adjustable, small volume, light
weight, easy to operate, reliable performance, wide application
range etc.
Safety—Pneumatically driven. Operates from air
hose like an air tool. No electrical hazard.
Product
parameters:
Model |
RTE*****6 |
|
|
Drive pressure |
**8bar |
Pressure range |
***8bar |
Pressure ratio |
6:1 |
Maximum pressure |
*8bar |
Drive cylinder diameter |
**0mm |
Increasing cylinder diameter |
*3mm |
Drive gas inlet size. |
3/8 |
Output flow(double) |
7
L/min |
Inlet size |
ZG3/8 |
Stroke |
*0mm |
Outlet size |
ZG3/8 |
Noise |
< *5DB |
Key features
include:
1.Compressed Air driven - no
electricity required (connect to normal air compressor)
In order to extend the lifetime
of the pump, the driving air pressure should not be higher than 8
bar
2.No airline lubricator
required
3. All components of the contact with the gas
are made of aluminum or stainless steel
4.Wide range of models with
different ratios
5. Can be customized system in
accordance with the standards of customer requirements
6.Easy to install, operate and
maintain
7. High quality seals, long life service
available
8. Gas drive, No heatã€flame or spark risk and explosion
proof
9.Automatic pressure holding,
whatever the cause of the pressure drop, the pump will
automatically start, keep the loop pressure constant
*0. The air booster weighs about *0KG, which is
easy to carry and can be configured according to the
requirements.
Applications include:
1. The pump is suitable for transferring R*2,R*2, R**4a,
R**0,R**7C, R**0A,R**0 etc refrigerant.
2. The pump can be also used for the recovery and perfusion of new
type environment-friendly refrigerant, liquefied gas (CO2, SF6,
Freon etc).
3. Pump configuration:
The refrigerant pump mainly consists of air drive chamber,
pressurizing chamber, auto reversing valve, inlet check valve,
outlet check valve, imported seal kits, air drive piston,
pressurizing piston etc.
4. The device is used in the refrigeration industry to be used in
the refrigerant central transport booster station for long-distance
transportation.
5. The refrigerant filling quantity is more than **0kg of unit
maintenance or production refueling.
6. Used for pressurization, filling and recovery of
refrigerant.