Description
Drum wood chip machine series of products is a special equipment
for the production of wood chips, this product is widely used in
particleboard factory, high density fiberboard factory, straw
plant, biological power plant. Wood chip factory and other
industries and manufacturers in the preparation section of the
first choice equipment. This product advanced structure, cutting
material quality, raw materials adaptive light, easy to operate and
maintain. The main cutting material is small diameter wood. Wood
cutting, processing residues (such as branches, branches, laminate,
lath, log core, waste veneer, etc.) can also be used to cut
non-wood raw materials (such as sugar cane, Reed, bamboo, etc.) the
machine by the body, knife roller. Upper and lower feeding roller,
conveyor belt, hydraulic system and other parts. The body is welded
with high strength steel plate, which is the support basis of the
whole machine. Two or three knives and four flying knives are
installed on the cutter roll. With specially made flying knife
bolts, the flying knife is fixed to the cutter roller through the
pressure block. The thickness of the cutting material is different.
The upper feed roll assembly can float up and down in a certain
range with the help of hydraulic system. The cut material falls
through the mesh hole and is discharged from the bottom. Large
piece of material will be cutting in the machine. Hydraulic system:
from the oil pump to the cylinder, can start cover, convenient
blade replacement; During maintenance, the feed roller assembly can
be raised to adjust the clearance of the flying knife, the bottom
knife and the comb board.
