Description
Item No (max) |
Fixed Carbon
(min)
(max) |
Sulfur(max) |
Ash(max) |
V.M |
Moisture |
Grain
size(*0ï¼…) |
Nitrogen(max) |
DT-CA**2 |
*8.*0% |
0.*0% |
0.*0% |
0.*0% |
0.*0% |
**5MM |
N/A |
DT-CA**6 |
*9.*0% |
0.*0% |
0.*0% |
0.*0% |
0.*0% |
**5MM |
0.*0% |
DT-CA**9 |
*8.*0% |
0.*5% |
0.*0% |
0.*0% |
0.*0% |
0.**5MM |
0.*3% |
DT-CA**0 |
*5.*0% |
0.*0% |
3.*0% |
1.*0% |
0.*0% |
**4MM |
N/A |
DT-CA**1 |
*9.*0% |
0.*3% |
0.*0% |
0.*0% |
0.*0% |
0.**5MM |
0.*3% |
DT-CA**2 |
*0.*0% |
0.*0% |
*6.*0% |
3.*0% |
2.*0% |
**5mm |
N/A |
By
using the carbon additive from HB Refractory in producing casting,
it can increase the used quantity of Scrap steel and reduce the
quantity of Scrap iron, or use no Scrap iron at all, HB carbon
additive has follows properties: high absorptive character, no
residue will be left, save production
cost.
1.
Usage:used to improve the Carbon content in
steel-melting and Ductile iron foundry
2.
Characteristica:high carbon, low sulfur, with stable effect for
improving the carbon content, high absorptivity of
carbon.
3.
Apply:Used in electric furnace steel smelting and
cast-iron for improving the carbon content
4.
Grain size:normal size:0.**3mm **4mm,**3mm,**5mm,**8mm,***0mm or per as customers special
requirement.
5.
Apply methods:
1).
If with simple and stable raw materials and electrical furnace
bigger than 5 MTS, we recommend the Additions dispersion, arrange
the mixture ratio in accordance with the requirements of carbon
content, adding the carbon additive together with metal furnace
material and other maerial into the bottom of the furnace, pls
kindly noted: dont mixing the carbon additive during melting, if
not, the carbon additive will be packed by the residue, and this
will effect the carbon absorption.
2).
If with simple and stable raw materials and electrical furnace
around 3 MTS, we recommend the centralize joining way, adding the
carbon additive at the same time onto the surface of the iron
liquid after some of iron liquid is left, and add the metal furnace
material immediately, press all the carbon additive into the iron
liquid, make the carbon additive totally contact with the iron
liquid.
3).
If with small size Mid-frequency faradic electrical melting
furnace, and raw material with high carbon ,like pig iron, we
recommend little adjusting way, after the steel-smelting, then
adjust the carbon content, adding the carbon additive on the
surface of the steel liquid, and make the carbon additive melted
and absorb by Vortex mixing or manpower
mixing.
6.
Compared with traditional pig
iron
1).
This product belongs to nonmetal, the melting point is********0
degree centigrade, there will be no residual and the absorptive is
high. 2)this product can be easily used in producing, and costed
quantity is much less than the pig iron, which can save the
production cost. 3)the sulfur content is this product is much less
than the pig iron, also with stable
property.
2).
Professional experience in domestic and international
transportation and distribution partners, professional domestic and
international trade operator to ensure the safety of goods
transport The domestic transportation :railway transport, ocean
shipping, truck transport The international transportation: railway
transport, ocean shipping, and air transportation,etc, carriers can
be done under FOB CIF CFR DDU DDP terms. We have rich experience in
packing , keeping you away from worry about
transportation.
Packing and delivery
details:
1.
Waterproof ton bags(without small bag
inside.
2.
*0kgs/*5kgs paper bag,*0 bags on one pallet or in one
MT-bag.
3.
*0kgs/*5kgs/*0kgs waterproof PP Woven Bag bags , **0kgs on one
pallet or in one MT-bag.
Above packing is our standard packing, if you
have special requirement about the packing, pls contact with us
freely.