FOB Price
أحصل على آخر سعر|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
الشخص الذي يمكن الاتصال به Linjian Jin
Fuzhou, Fujian
Alloy No. | Wall Thickness(mm) | Drawing | Length(mm) | Temper | |
A1050,A1060, A1070,A1100 | Above0.8 | Any drawing is available | 20-8000 |
O,H12,H22,H14,H16,H18, H24,H26,etc |
|
A6061,A6082,A6063,6005 | Above0.8 | 20-8000 | T3,T4,T5,T6, T651,etc | ||
Fabrication | 1.Cutting,2.Drilling,3.Punching,4.Millling,etc | ||||
Packing : Inner plastic paper interleaving each profile,outer fixed by plywood or pallets, or as per your requirements |
|||||
Standards:ASTM-B209. EN573-1, GB/T3880.1-2006 | |||||
Quality of material: totally free from defects like white rust,oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
|||||
Application : Mainly used for car cylinder parts, heat sinks,railway luggage shelf , assembly line, construction and industrial aluminium profiles, home appliance etc. |
|||||
MOQ | 1 tons | ||||
Payment term: | TT,L/C | ||||
Delivery Time | 15 days after 30% TT payment or receiving L/C copy | ||||
Kind attention : Specifications can be customized as the customers requirements. |
Aluminum profile/Extrusion Price is one of the basic products. We are capable to design and extrude aluminium extrusion profiles with diameter up to 200mm. The most commonly alloys are 6061, 6063, etc. We accept different surface treatment like Anodize, Powder Coating, Polish, Brush, ect. Both standard and customized aluminium extrusions are available.
Different alloys have different properties, the selection for alloys is important for aluminium extrusion profile.
1000 series for Aluminium Profile:This non-heat treatable aluminum alloy series is available in extruded sections with a minimum purity of 99.0% aluminum for 1100 alloy and as high as 99.6% minimum aluminum for 1060 alloy.They offers the best corrosion resistance of any alloy group and displays excellent forming,welding,brazing and finishing characteristics.These alloys can be extruded as profiles,rod,bar and tubing.Typical alloys are as follows:1050,1060,1350,1100
6005 alloy for Aluminium Profile:As medium strength alloy that is similar to alloy 6061 except it contain higher amount of silicon.It is used in designs that require moderate strength,but is generally not recommended for applications where the structure may be susceptible to impact or overloading.
6061 alloy for Aluminium Profile:it is one of the most widely used alloys in the 6000 series,popular for medium to high strength requirements and has good toughness characteristics.It is suggested for standard and custom,solid and hollow shapes,rod and bar products,and semless and structural pipe and tube.It has good corrosion resistance and offers good finishing characteristics and responds well to anodizing.however where cosmetic apprearance is critical,consider the use of alloy 6063.
6063 alloy for Aluminium Profile:One of the most popular alloys in the 6000 series,provides good extrudability and a high quality surface finish.Used in standard architectural shapes,custom solid shapes and heatsinks,as well as seamless and structural tube and pipe.It provides good resistance to general corrosion,and offers excellent response for anodizing in its T5 temper.
Detailed Introduction of typical Alloys for Aluminum Profile
A. Chemical Composition for Aluminium Profile
Alloy | Mg | Mn | Fe | Si | Cu | Zn | Cr | Ti | Other Elem | Total Others | Al |
6061 | 0.8-1.2 | ≤0.15 | ≤0.7 | 0.40-0.8 | 0.15-0.40 | ≤0.25 | 0.04-0.35 | ≤0.15 | ≤0.05 | ≤0.15 | Rem. |
6063 | 0.45-0.9 | ≤0.10 | ≤0.35 | 0.20-0.6 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.05 | ≤0.15 | Rem. |
B. Detailed Description for typical Aluminum profile
Alloy 6061 for aluminum profile
Composition:Al 1.0Mg 0.6Si Cu Cr (Aluminum 6061 for Industry Aluminum Profile )
Characteristic Properties:Very good corrosion resistance. Very good weldability; reduced strength values in the zone of welding. Heat treatable alloy. Medium high strength alloy with a strength higher than 6005A. Medium fatigue strength. Good cold formability in the temper T4. Not suitable for very complex cross sections.
Applications:Heavy duty structures in rail coaches, truck frames, ship building, bridges, military bridges, aircraft, piping, pylons and towers, transportation, boilermaking; Motorboats, aerospace applications, helicopter rotor skins; Rivets.
Alloy 6063 for aluminum profile
Composition: Al 0.7Mg 0.4Si (Aluminum Profile 6063 Industry Aluminum Profile)
Characteristic Properties:Very good corrosion resistance. Very good weldability. Medium strength heat treatable alloy slightly lower than 6005A. Medium fatigue strength. Good cold formability especially in temper T4. Suitable for very complex cross sections. Standard decorative anodizing quality.
Applications: Architectural sections for windows, doors, curtain walls. Interior fittings, frame systems, lighting, ladders, railings etc. Heat sink sections, electronic modules, electro motor housings. Flexible assembly systems, special machinery elements; Truck and trailer flooring, pneumatic installation, railway, inside applications. Irrigation pipes. Furniture, office equipment. Radiator and other heat exchanger applications;
Packaging and shipping for aluminum profile
After production process, Aluminum Extrusion Profile will come into
the aluminum packing process. Our Packing staff will study
different design and figure out the quantity and the way to be
packed in one bundle, thus the proper way will be chose to avoid
over heavy weight and to protect the aluminium extrusion profile.
Generally, two ways of packing are available: one is in brown paper
and another is in shrinking film. Firstly, the pearl film will be
wrapped on the surface and angle of aluminum extrusion profile to
avoid any scratch between them, then bonded by a small film strip
will be placed middle and end of the aluminum extrusion profile.
Lately brown paper or shrinking film will be chose
At your option to cover the aluminium extrusion profile. A small
tag standards for certificate of birth which it will states code
number, length, surface treatment, production date. ect. Brown
paper is a workable means to mostly protect the aluminium extrusion
profile with lower cost comparatively. Our brown paper is in three
layers, thick enough to resist rough handling. It is extremely
suitable for long distance transportation. The Shrinking film is
light in weight, the thickness counts from 8cto 12c which is at
your option. They are usually used for short distant
transportation, more ever, it has the overwhelming advantage of
convenience for sales in the super market, vision to catch.
Our service for aluminum profile
In order to provide a professional service and accurate product to our customer, we usually offer the following process to finalize any order for aluminium extrusion profile:
1. Production possibility confirmation: Detailed drawing or sample as well the dimension requirement of the specific aluminium extrusion profile are expected to be provided to our engineer department for the confirmation of the production possibility or any difficulty in design or surface treatment.
2. New drawings will be provided to customers for confirmation with detailed information in about 3-7 days, subject to the quantity of dies
3. Color sample should be confirmed by both seller and buyer to avoid any misunderstanding before placing any real orders
4. Samples of this specific aluminium extrusion profile will be ready as soon as the die charge is paid(which will be returned in the future),in about 15-20 days.
5. After the sample is confirmed, massive production could be started
Service:
The Lingfeng team is ready to assist with any product needs or enquiries. We value our customers and welcome your thoughts and feedback.
Please send comments, questions and requests through alibaba or our personal contact so they can be directed to the appropriate department.
About samples: Based on our company rules, a few samples are willing to be offered, but clients are requested to pay freight.
Working time:9:00~17:30(GM+8) from Monday to Friday, but you also can contact with us via personal contact information during our leisure time. We will try our best to offer you service in 24*7 hours.
Any quality, quantity problems are occured, response you will get in time not over more 24 hours after we recieve your complains. Problems will be solved in one week throught friendly negotiation.