Use of mold：​
The tablet press mold is one of the important components in the
tablet press, also known in the industry as a tablet press die. The
die of a tablet press is divided into three parts: upper punching
die, medium punching die and lower punching die. We manufacture and
manufacture punching die with round, special type, rotary type,
single type, etc. We have many years of technical experience in
materials, heat treatment, grinding and polishing. Especially in
the selection of materials, special selection. Use imported steel
to improve the quality of the mold. In terms of technical
specifications, we always adhere to manufacturing standards. The
tablet press mold is assembled on the tablet press for pressing
Chinese and Western medicine tablets, nutrient tablets, lozenges,
spirulina tablets, milk tablets, vitamin C effervescent tablets,
effervescent tablets, seasoning blocks, camphor balls (health
balls) , aromatic balls, disinfection tablets, fertilizer tablets,
bath salt balls, button batteries, electronic components,
metallurgical powder ceramic particles.
The main content is
cleaning, lubrication and inspection：
A. Maintenance during mold loading:
1. Before the mold is installed, the upper and lower surfaces of
the mold should be cleaned to ensure that the mold mounting surface
and the press table surface are not crushed and the mold is in
production. The parallelism of the upper and lower mounting
surfaces;
2. After the mold is installed, the mold is opened, and the parts
of the mold are cleaned, especially the guiding mechanism. For the
surface part mold, the profile should be cleaned to ensure the
quality of the parts;
B. Maintenance in production:
1. Regularly apply oil to the corresponding part of the mold during
production. Such as: the drawing ring of the drawing die, the
rounded corner; the edge of the edge of the trimming die; the part
of the flanging block;
2. Regularly clean the waste of the small hole waste road of the
trimming punching die.
C, maintenance after production:
1. After the production is finished, the mold should be thoroughly
inspected;
2. Thoroughly clean the mold to ensure the cleanliness of the
mold;
3. Clean the waste in the mold to ensure that there is no waste in
the waste box;
4. If it is used for a long time, spray it with anti-rust oil. If
it is not used for a long time, put it in the diesel after it is
cleaned.
Mold
features​：
Made of carbon steel, bearing steel, chrome 12 material
manufacturing digital processing center finishing, in line with IPT
standards corrosion resistance, impact resistance, wear resistance,
high temperature resistance, long life interchangeability 100%
(regardless of round or special type Mould) Accuracy: the surface
roughness of the 2nd die surface reaches Ra 0.1, and the remaining
mating surface reaches Ra 0.4 hardness: die HRC58+2, medium die
HRC60+2 is widely used in:
GZP series tablet press THP series tablet press
ZPW series tablet press TDP series tablet press
DP series tablet press Single punch tablet machine
Basket Presser Small Rotary Tablet Press
