Description
The hydraulic coupler of the scraper is the transmission part
between the reducer and the motor of the coal mine scraper, which
can transfer the torque.
If there is a problem with the hydraulic coupler of the scraper
machine, it will make the scraper conveyor of coal mine unable to
work normally. Its common problems mainly include the following
points:
1. The temperature of one of the two hydraulic couplers of the
scraper is too high
2. Oil leakage in hydraulic coupler of plate scraper
3. The temperature of hydraulic coupler of plate scraper has
exceeded the specified value
Common fault analysis of hydraulic coupler for plate scraper
In view of the above scraper hydraulic coupler, through the
reasonable way to solve the problem! When the temperature of one of
the two hydraulic couplers of the squeezer is too high, it is
because the oil amount of the two hydraulic couplers is not equal.
It is enough to check and adjust the oil amount of the two
hydraulic couplers to be the same. In case of oil leakage in the
hydraulic coupler of the plate scraper, check whether the oil
filling plug and fusible alloy protection plug are loose, tighten
it if so, then check whether the sealing ring or gasket is worn
out, and replace it. If the temperature of the hydraulic coupler of
the scraper exceeds the specified value, the formula of the fusible
alloy protection plug is wrong and needs to be reconfigured.
These problems of hydraulic coupler of plate scraper require us to
be serious and responsible in daily maintenance work. In fact, the
outbreak of many problems is a process of accumulation. Early
detection and early solution can ensure the safe and stable
production. Henan Shuangzhi machinery professional coal machine
parts manufacturers, all kinds of coal machine parts welcome to
consult cooperation!
