Description
The cables are designed for the transmission and distribution of
electricity in photovoltaic systems for outdoor use in combination
with a system of plug connectors with a nominal constant voltage of
1.5 kV between current-carrying conductors, as well as between
current-carrying conductors and the ground. It is allowed to work
in AC electrical networks with a voltage of 1.0 / 1.0 kV.
Cables can be laid outdoors without protection from sunlight.
The cable in its design and technical characteristics complies with
the EN ****8:***8 standard.
Cables are resistant to: solar radiation, high humidity, ozone,
rain, frost and dew, oils, dynamic dust, ammonia (*0%), dilute acid
solution (3%) and alkalis (sodium hydroxide 1%), special media
(pollutants - sulfur dioxide, carbon monoxide, nitrogen oxides,
hydrocarbons (oil vapors), common cleaning solutions), fungi.
Construction.
Jacket - tinned copper multi-wire.
Insulation is a cross-linked halogen-free compound.
The shell is a cross-linked halogen-free compound.
The color of the shell is black.It is allowed to manufacture the
cable sheath in other colors, in this case, the color is specified
when ordering.
The color of the insulation is natural.
Technical specifications.
Climatic version - (N) temperate climate.
The operating temperature range is from **0 to *0 ° C.
Relative humidity at temperatures up to *0 ° C is *8%.
The bending radius when laying the cable is at least 4 outer
diameters.
The permissible continuous in the maintenance of the conductor
heating temperature is *0 ° C.
The maximum core temperature is **0 °C for a maximum of *0,**0
hours (the maximum ambient temperature can reach *0 ° C).
The permissible low temperature of laying and laying the cable
without preheating is at least minus *5 ° C.
Fire-resistant in accordance with IEC ******1.
The emission of smoke during gorenje and smoldering of the cable
does not lead to a decrease in light transmission in the test
chamber by more than *0% according to IEC ******2.
Halogen-free according to IEC ******1 and IEC ******2.
The service life in a stationary installation is at least *5
years.