FOB Price
أحصل على آخر سعر450 ~ 600 / Metric Ton ( Negotiable )
|Minimum Order
Place of Origin:
-
Price for Minimum Order:
Minimum Order Quantity:
20 Metric Ton
Packaging Detail:
25kg per bag
Delivery Time:
20 days after Loading
Supplying Ability:
2500 Metric Ton per Month
Payment Type:
-
الشخص الذي يمكن الاتصال به Ms. Noman
91 Western Ave, East London, East Cape
|
HDPE cable material Property |
Unit | Typical Value |
| Mass density | g/cm 3 | 0.****0.**9 |
| Melt flow Rate(**0 centidegree /2.*6kg) | g/*0min | ≤1.0 |
| Tensile yield strength | MPa | ≥*9.0 |
| Flexural modulus | Mpa | ≥**5 |
| Elongation break | % | ≥**0 |
| Impact Embrittlement temperature | centidegree | MAX ***8 |
| Dielectric Constant | **0KHZ | 2.*2 |
| 1MHZ | 2.*1 | |
| Loss Tangent | **0KHZ | MAX 0.***1 |
| 1MHZ | MAX 0.***1 | |
| Volume resistivity | OHM-CM | MIN 1x*0 *5 |
| Application |
Mainly used for the production of high toughness of the telephone,cable insulation material |
|
| Physical Properties | Test Method | Nominal Value | Unit | |
| Density | ISO ***3 | 0.**1 | g/cm3 | |
| Melt Mass-Flow Rate (MFR) | ISO ***3 | 1.9 | g/*0min | |
| Hardness | ||||
| Shore Hardness (shore D) | ISO **8 | *5 | ||
| Mechanical Properties | ||||
| Tensile Modulus | ISO ****2 | **5 | MPa | |
| Tensile Strength | Yield, | ISO ****2 | 9.0 | MPa |
| Break, | *3.0 | MPa | ||
| Tensile Strain(Break) | ISO ****2 | **0 | % | |
| Modulus of Elasticity | Internal Method | **0 | MPa | |
| Thermal | ||||
| Vicat Softening Temperature | ISO **6/A*0 | *9.0 | °C | |
| Melting Temperature (DSC) | DIN ****5 | **8 | °C | |
| Peak Crystallization Temperature (DSC) | DIN ****5 | *7.0 | °C | |
| Heat of Fusion | DIN ****5 | **0 | J/g | |
| Electrical | ||||
| Volume Resistivity | ASTM D**7 | 8.5E**5 | ohm •cm | |
| Dielectric Strength | ASTM D**9 | *0.0 | kV/mm | |
| Dielectric Constant (*0Hz) | ASTM D**0 | 2.*0 | % | |
| Dissipation Factor (*0 Hz) | ASTM D**0 | 0.****0 | ||
| Properties | Test conditon | Test method | Test data | Unit |
| Density | 0.*1 | |||
| MFI | 2 | |||
| Drop impact strength | ASTM D****9 | *0 | g | |
| Elongation ,vertical/horizontal | ASTM D***2 | **0/**0 | % | |
| tensilestrength,thermal resistance | ASTM D****4 | **5/*5 | Kg/cm | |
| elongation | ASTM D***8 | **0 | % | |
| tensile strength | ASTM D***8 | **0 | ||
| tensile strength,vertical/horizontal | ASTM D***2 | **0/**0 | ||
| Vicat softening point | ASTM D****5 | **3 | °C | |
| melting point | ASTM D****7 | **6 | °C | |
| Turbidity | ASTM D****9 | *2 | % | |
| *5 glossness | ASTM D****7 | *5 | % | |
