Computer-controlled automatic slitting machine

Description

LS****0 Computer-Controlled Automatic Slitting Machine This machine is suitable for slitting and rewinding of roll materials such as BOPP, OPP, PET, CPE, PVC, and paper fabrics. I. Performance Features and Configuration 1. This machine a vertical slitting machine with the unwinding and rewinding rolls located at the front and back of the machine. It features an integrated control panel for flexible and operation, and the main motor is controlled by a variable frequency drive. 2. The unwinding tension is controlled by a magnetic powder brake (*0kg/m and the rewinding tension is controlled by two magnetic powder clutches (*0kg/m). 3. It is equipped with a waste edge blowing device (**5KW). 4. The unwinding roll has automatic edge correction controlled by a hydraulic cylinder. 5. The material length is automatically calculated and set, and machine will automatically stop at the set length. 6. The cutting blade assembly is manually controlled, with *4 blades (8 long blades, 6 short). 7. It has 3 press rollers. 8. The unwinding roll uses two ?*6 pneumatic expanding shafts, and the rewinding roll two ?*6 segmented pneumatic expanding shafts. 9. The main traction roll is controlled by pneumatic pressure, with manual control, and the transmission guide is balanced and dynamically adjusted. *0. The rewinding roll supports are gear-driven (no universal joint is used for high-speed rewinding). II. Control 1. The main motor is controlled by a variable frequency drive. 2. The automatic integrated edge correction system is controlled by a photoelectric sensor. 3. rewinding tension is controlled by a taper, and the unwinding tension is automatically controlled to maintain constant tension. 4. The entire machine is controlled by a programm logic controller (PLC). 5. The operation interface is a 7" color touch screen. III. Technical Specifications 1. Maximum diameter of the sl roll: ?**0mm. 2. Maximum width of the unwinding roll: ***0mm. 3. Width of the slitted roll ******0mm. 4. Diameter of the rewinding roll: ?**0mm. 5. Slitting speed: ****0m/min. 6. Slitting accuracy: ≤±1mm. 7. Main motor: 7.5KW. 8. supply: **0V/AC *0Hz (three-phase four-wire). 9. Dimensions: L*W*H (**0****0****0mm). *0. Weight: ***0kg