Tianjin Oliter Electronic Industrial And Trade Co., Ltd

General Introduction for Molten Steel Disposable Thermocouple Tip Disposable Thermocouple is used to measure the temperature of molten steel and high temperature molten metal, and it is a one-time consumption.The working principle is based on metal thermoelectric effect,making use of the temperature difference from both ends for the temperature measurement of molten steel and molten metal. General Specifications for Molten Steel Disposable Thermocouple Tip Graduation: B, S , R Structure for Molten Steel Disposable Thermocouple Tip Fast thermocouple structure, it is mainly composed of measuring tip and paper tube. The positive and negative wire is weldied with the compensation wire,which is embedded on the the bracket,which is coated with paper tube. Also there is quartz support and protection for the thermocouplepositive and negative wire.The outside with the slag cap, all components in the head and with refractory filler glue into a whole, and sealed, so for one-time use. Using Method for Molten Steel Disposable Thermocouple Tip 1, According to the measured object, selecting the appropriate protection tube length and suitable temperature measuring gun. 2, put the fast thermocouple on the temperature measuring gun, and let the digital meter back to zero, if it shows good contacts at this moment, then can be measured. 3, Disposable Thermocouple insertion depth of the molten steel with ******0 - mm advisable, don't contact furnace wall. When get the temperature,get back the gun,if too long time,the gun will be burnt out. 4, After getting the temperature,remove the tip and install a new one, and pause for a few minutes.Do not measure it continuously, otherwise there will be fluctuations.