سعر فوب
أحصل على آخر سعر|
- Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
الشخص الذي يمكن الاتصال به mamarketing-cn.8122.063327
20 Floor Yuan Mansion, 738 Dongfang Road, Shanghai, Shanghai
Upper roll device
The up roller gear drive from the main for turning, the ends of the
SP-1 bearing support, drive-side through the flat key, off the main
drive gear and connect the device to transfer torque, tip-side with
the protection of Steel .
The material of the up roller is 42CrMo, heat hardening is
HB220-300.
main drive device:
By the Y2 motor, three speed reduction gear, transmission torque to
the roller. In the high speed shaft of reducer with putting the
power hydraulic brake.Power supply is 380V/50Hz.
3-4:Down roller device:
Down roller supports under the bearing, the bearing housings on
both sides of the rack mounted inside the track, the bottom of the
piston and cylinder connected. Bearing in the liquid under pressure
can rise and fall along the rail, according to the size of the
thrust rod, steel plate under the roller clamping force required by
the hydraulic system pressure control valve be adjusted.Addition of
the down lower rollers can roll adjustment, improve the accuracy of
product under the same material heat treatment hardening
is HB220-280.
3-5, Side roller device:
Side of the roller bearing in the radial bearing pedestal, bearing
on both sides of the rack mounted inside the track, the bottom of
the piston and oil cylinder connected. Bearing in the liquid under
pressure, can be tilted up and down along the rail, the size of the
piston rod of the thrust force according to the needs of steel
plate by the hydraulic system pressure control valve be
adjusted.The side roll quality alloy steel, heat treatment
hardening is HB220-280.
3-6:Overturn device:
Overturn device through the oil cylinder , hinges torn off and
driving overturned on a roller bearing aircraft overturned in order
to remove products.
3-7:Hydraulic system(parts)
Hydraulic system consists of gear pump, valve, fluid connectors,
hydraulic accessories.Superposition valve series hydraulic valves
used, piping layout simple and easy to maintain
debugging.
System consists of three circuit composed of overpressure
protection and pressure control loops, synchronization loop, speed
loop.
Loop through the main relief valve pressure regulator conditioning
system working pressure. System working pressure 19.5Mpa.
3-8:Electricity system(parts)
Electrical control system includes the electrical box, operation
control panel, hand-held .Main switch with short
circuit protection and the main motor overload protection.
Reversible motor contactor control by the exchange; control circuit
is controlled by PLC programmable controller system, relay less
reliable action and long life. Control cabinet with the completion
of the process of rolling all products control s, lights,
etc. to the operation of the machine control and status
control.
بلد: | China |
نموذج رقم: | - |
سعر فوب: | أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | - |
تفاصيل التغليف: | - |
موعد التسليم: | - |
القدرة على التوريد: | - |
نوع الدفع: | - |
مجموعة المنتج : | Bending Machine |