8M depth pulse induction underground metal detector

سعر فوب

أحصل على آخر سعر

150 ~ 190 USD / Piece

4 Piece Minimum Order

بلد:

China

نموذج رقم:

VLF-18

سعر فوب:

150 ~ 190 USD / Piece (قابل للتفاوض) أحصل على آخر سعر

الموقع:

China

سعر الحد الأدنى للطلب:

150 per Piece

الحد الأدني للطلب:

4 Piece

تفاصيل التغليف:

75*36*18CM g.w. 3.5kg

موعد التسليم:

5 days

القدرة على التوريد:

1000 Piece per Month

نوع الدفع:

مجموعة المنتج :

Gold finder metal detector

الاتصال الآن

Junhong Electronic & Technology CO, . LTD

China

عضو مجاني

الشخص الذي يمكن الاتصال به Mr. David

Xintian, Dongguan, Guangdong

الاتصال الآن

مواصفات المنتج

frequency:19khz

الوصف

KTY Pulse Induction Underground Metal Detector

KTY is a professional metal detector with metal discrimination and a high sensibility to precious metals. This metal detector kit consists of *8 inch coil and a optional cable coil which can help to locate objects in a depth of 8 meters
KTY Applies pulse induction technology of have decisive advantages in comparison to conventional VLF (very low frequency) detectors:

pulse induction system with microprocessor-controlled metal type display
undisturbed searching in mineralized soils and salt water
5 different search coils with automatic calibration
high sensitivity to gold and precious metals
convenient search and easy handling without the necessity of previous knowledge or preparatory training

Spacious search areas:
Only the 1.5x1.5 m search coil (pulse induction technology) enables a comfortable and fast exploration of large areas. Example: the scanning of an area with the size of a soccer field will only take **4 hours, while the search with a conventional device with a panning coil would take several weeks.
The KTY was also developed for the search after large, deeply embedded metal objects and is especially suitable for professional seekers who want to search in wide-ranging areas in a speedy and efficient manner (small parts, e.g. rusty nails or bottle caps will not be shown).
Up to 8 m depth performance:
With pulse induction technology and big search coil (1.5x1.5 m cable coil) it is possible to locate larger objects in a depth of up to 8 m. In comparison, conventional detectors with small coils only allow a search depth of at the most 2 m.
Exploration without disturbance:
Most of the mineralized soils contain stones with metallic characteristics which therefore are displayed as metal objects by the majority of detectors. Thus, a selective search is difficult.
These soils (the same goes for salt water) are no problem for KTY- with the Reset- (automatic zero balance) most of the disturbing mineralized objects (which can lead to errors) will be neutralized.
Metal discrimination
For metal discrimination the KTY is provided with a micro-processor, controlled conductibility recording. Thereby metals like iron, copper, aluminum, gold or silver are discriminated and separately displayed.

Electronic unit
The electronic unit is installed in a high quality case. In the front you will find the main knob, the reset as well as the frequency and volume regulation. The digital display shows the different Sensitivity values.
Search modes:
ID (Discrimination Mode)
In this search mode the discriminator comes into operation. Thereby an optical and acoustical discrimination takes place. The different metals will be signaled through varying tones and conductivity values.
Examples of differential conductivity values:

light metals (e.g. aluminum)	****0
copper	****0
iron	****0
gold, silver, platinum	**0 and over

AM (All Metals Mode)
All metals will be visualized without discrimination (here the metals will not be examined for their conductivity).
This position has the advantage, that you can detect with the highest sensibility; through the indication value one can evaluate the depth of the object. The lower the value number, the deeper the metal object is hidden under the surface. The shape of the object can be identified as well.
Coils
For the KTY we offer different search coils, which can be connected to the electronic unit without additional adjustment.
Automatic adjustment: To reach the optimal search depth, the adequate search coil should match the size of the object. KTY works with a variable search frequency between ********0 Hz, therefore the application of all search coils is uncomplicated. The various search coils for the KTY are connected to the electronic unit in which a special circuit mechanism controls the coil electricity and adjusts the adequate search frequency automatically.
By using the appropriate search coils (*5 cm) smaller and medium-sized objects can be located. To reach an ideal search result - depending on the size of the object - the adequate search coil should be selected.
*8"(*5 cm) search coil
Useful for the search after small, medium-sized and large metal objects. Also very convenient for a quick search of an area.
Optional 1.5 x 1.5 m Search frame
Preferably used for the depth sounding after medium-sized and large metal objects. Large areas are scanned fast and efficient.
Fast battery charger
The NiMH-accu is charged within *0 minutes from power outlet or car (cigarette lighter) and guarantees an operating time of **8 hours.

Additional optional accessory

2 x 2 m (6.*6 x 6.*6 ft) cable search coil (without frame)
Lithium-Ion-accu with double power capacity (installed in electronic unit)
- Electronic unit with integrated accumulator battery, leather bag equipped with shoulder straps
- case

بلد:	China
نموذج رقم:	VLF-18
سعر فوب:	150 ~ 190 / Piece (قابل للتفاوض) أحصل على آخر سعر
الموقع:	China
سعر الحد الأدنى للطلب:	150 per Piece
الحد الأدني للطلب:	4 Piece
تفاصيل التغليف:	753618CM g.w. 3.5kg
موعد التسليم:	5 days
القدرة على التوريد:	1000 Piece per Month
نوع الدفع:	-
مجموعة المنتج :	Gold finder metal detector