ALuminum Conductor Steel Reinforced ACSR Bare Conductor

الوصف

ALuminum Conductor Steel Reinforced ACSR Bare Conductor
 Applications

ACSR is a composite conductor consisting of seven or more aluminium and galvanized steel wires built up in concentric-lay-stranded layers. 

Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR provides optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity. 

Advantage

 a. Excellent electric and mechanical characteristics

 b.Good conductivity,Resistance chemical corrosion and heat-ageing, environment stress

 c.Unit volume light, Simple in structure

 d. Convenient to use, especially for laying across

Construction 

Aluminum alloy ****-H**9 wires, concentrically stranded about a steel core.

Core wire for ACSR is available with class A, B, or C galvanizing(GA,GB,GC); aluminized,aluminum wrapped, aluminum coated Or aluminum-clad (AW). The steel core may be single wire or stranded wires depending on the size.

Additional corrosion protection is available through the application of grease to the core

or infusion of the complete cable with grease. 

Material Standard 
(1).The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T *********7(equivalent to IEC ****9: ***7). 
(2).The zinc coated steel wire used for ACSR conforms to IEC ****8: ***7. 
(3).Production can be arranged according to customers requirements for material standard, etc. 

Specifications 
ACSR bare conductor meets or exceeds the following ASTM specifications: 

B***0 Aluminum Wire, ****-H*9 for Electrical Purposes 
B***1 Aluminum Conductors, Concentric-Lay-Stranded 
B***2 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR) 
B***1 Aluminum-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AW) 
B***8 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/GA,GB,GC) 
B***0 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR/AZ) 

B**2, B**3 rear earth aluminum conductor steel reinforced

(ACSR/RE: ACSR/MA, MB, MC, MS)

 Other manufacturing standards: GB/T ********8, IEC ****9, EN ****2, DIN ****4, BS **5 , ASTM B**2, NFC *****0

We factory also supply below bare conductor:

Relevant Standard:

All Aluminum Conductor(AAC)& Aluminum Conductor Steel Reinforced(ACSR))for ASTM (AAC, ACCR, AAAC, ACSR) Generally Confirming to IS **8 (Part-I, II, IV), IEC***8
(AAAC) Conductor as per ASTM-B********2
(AAAC) Conductor as per BS*********0
(AAAC) Conductor IS: ***-IV****4
(ACSR) as per ASTM-B********2
(AAC) as per BS**********0
(AAC) as per IS*****1: ***6
(AAC) as per ASTM-B********0
(ACSR) as per IS: ***-II: ***6 & IS: ***-V: ***2
(ACSR) BS****-II****0
(AACSR) as per IEC*********1

Property of ACSR Bear Conductor:

• Ambient Temperature - *0°C
• Maximum Conductor Temperature - *5°C
• Wind Speed - 0,*4 m/s
• Normal Stringing Temperature  *5°C
• Solar Radiation - 0,**9 Wcm*2
• Solar Absorption Coefficient - 1

Sag and Tension charts are available on request. The following information to be supplied:

(a) Span length

(b) Maximum design load (*5% of UTS if not specified)

(c) Stringing temperature.

Notes 

Resistance is calculated using ASTM standard increments of stranding and metal conductivity of *1.2% IACS for EC (***0) and 8% IACS for steel. AC (*0Hz) resistance includes current dependent hysteresis loss factor for 1 and 3 layer constructions. 
Current ratings are based on *5oC conductor temperature, *5oC ambient, 2ft/s wind, *6/watts/sq. Ft sun, 0.5 coefficients of emissivity and absorption.