Cement Based Infiltration Crystalline Type Waterproofing Coating

الوصف

coatingPermanent and environmental protection waterproof

Products Code:       L***8

Products Standard: CCCW ï¼ˆâ…¡ï¼‰

Introduction：

master batch, high-performance additives, high-strength cement, and grading quartz sand. Active substances rich in such product can dissolve in water and infiltrate the Features:

5. Coating layer strong enough for subsequent construction without any protection layer.

Construction tips:

      (3) Internal corners, external corners and complex node parts should be treated into arc angles.

(4) Bases are required to be humid but ponding-free before construction.

      {C}Method of application

mixture disappear, then stop stirring for *0min and stir once again before application. The mixture obtained should be used within 1 hour.

(2) Two or more layers of coating is required, each of which  perpendicular direction to previous layer and 

moist maintenance **5 times after *2 hours. Better maintenance by covering humid cloth or straw bags is also suggested if affordable.Notes:

      {C}2.Stirring twice contributes to curing, uniformity, eliminating air bubble.

3.  The amount of water should not be excessive for retaining property of coating.

5.  Sun exposure in summer or construction below 5 CReference dosage

This product contains cement ingredients irritant to skin, which requires prevention from powder suction during construction. Please 

      {C}Keeping away from rain washing, damaging during transportation and storing indoor, avoiding light.