Polymer waterproof coating(Permeable crystallization type)

الوصف

Polymer waterproof coating（Permeable crystallization type）

kitchen and bath waterproof I best

Products Code:   L***0

Products Standard: JC/T *******1

Products model: II(emulsion type)

Introduction：

This product is by the German basf, high-performance synthetic acrylate polymer emulsion and inorganic powder according to the proportion of science into a two-component products . Has good permeability, corrosion and bonding performance.

Features:

Excellent bonding performance

Be used on damp base

Corrosion resistance, high temperature resistant, low temperature resistance, ageing resistance

Non-toxic, harmless, tasteless, no pollute the environment

Permeable crystallization waterproof, If no artificial damage and structural deformation, with buildings same life.

Especially suitable for directly paste veneer material on the waterproof layer(Such as putty, sand ash, ceramic tile, etc)

Range of application:

Especially suitable for families which need attach with ceramic tile of toilet, kitchen, close balcony, moisture of water proof and seepage proof.Can also be used for the construction with waterproof, anti-corrosion

Industrial and civil construction of seepage prevention and seepage repair, waterproof, seepage prevention of all kinds of pools and swimming pool.

Aerated concrete surface sealed and waterproof, seepage control

As interface treatment agent

Repair of the highway bridge engineering

Polystyrene insulation board and ceramic tiles adhesive, With anti-corrosion, waterproof function.

Construction tips:

    Base treatment

Base surface must be firm, smooth, no dust, no pollution, no cast or other

Base surface voids, holes, cracks, etc withLencaqis quick Condensing Plugging king filling wall and smooth, sharp edges and bump should be removed.

Bases are required to be humid before construction.( But can't havehydrops) The basal application of porous type with delayed coagulation Plugging king smooth, internal and external corner and other node do circular arc Angle(internal cornerR＞*0mm、external cornerR＞*0mm).

Method of application

Pour powders into matched emulsion slowly and keep stirring until the lump of solid in themixture disappear. Stop stirring for *0min and stir for 2min before use. Better to keep stirrerat the bottom of the container in case of air introduction. The mixed products should be used within 1 hour.

Paint the mixture on humid but ponding-free base uniformly with palm fibre brush.Every layer should not be constructed before previous layer is solidified and each layer should be brushed in perpendicular direction to previous layer. Wool brush is suggested for the last layer to get smoother surface. If this is a finish coat layer, it is suggested to do crosswise drawbench treatment with palm fibre brush to enhanceadhesive property.(all thickness is 1.**2mm)

Fiberglass cloth can be used in large crack or deformation joint.

High pressure spraying method is suggested in large area construction.

Notes:

To clean up base during the construction, Keep the grass-roots smooth, clean, no dirt

Must be worked on the surface with humidity, but it can't havehydrops.

Construction temperature : 5 - *5℃

construction under sun exposure should be prevented in summer

After Construction was finished *4 hours should be sprinkler maintenance **3 days

Tear after packing should be used up in a short time, should not be stored for a long time

Reference dosage

Applying for dampproof,reference dosage is1.2 kg/m2, one layer of brush work about0.7mm thick on smooth base.

Applying for waterproof, twice brushworks of 2.**3.5 kg/m2 are recommended to obtain 1.**2mm thickness. Specific amount depending on the base status.

Packaging and storage:

cool and dry place, sealed condition one year shelf life. *0 kg/barrel (two-component)

Technical parameters