الوصف
ENH Combined PMB/ Emulsion
Bitumen Pilot Plant
The pilot plant is specially
designed to meet the demands of PMB and bitumen emulsion recipe
research and new products development.
This plant can be used to
simulate the working status of industrial production, and make it
possible to produce small scale in-line PMB/ bitumen emulsion in
laboratory. The excellent simulation portability of this plant
offers possibility to directly compare the data of technical
parameters during industrial production. It helps in improving
recipes and developing new recipes to meet the demands of local
aggregates.
The ENH pilot plant is easy to
operate because of its reasonable and advanced design. It is made
of stainless steel, which leads to the long life and easy
maintenance. There are three types of the pilot plants: the PMB
pilot plant, the bitumen emulsion, and the combined PMB/ bitumen
emulsion pilot plant. We can customize according to requirements of
clients.
Bitumen Emulsion Working
Principle
The bitumen emulsion pilot plant
is a convenient compact small scale emulsion plant used in research
and development of bitumen emulsion recipes.
The base and frame of the plant
are made of stainless steel, and the *0 mm separation layer can
prevent the noises of working motor, mill and pump. The cleaning
and maintenance is easy for the operator.
The controller of pumps and mill
are on the control panel, equipped with flow and setpoint digital
display. The automatic PID controller ensures the high accuracy of
the flow during production.
PMB Working
Principle
In the batch production, the
control system can ensure the temperature of the premixing tanks by
bitumen circulation after set the required amount of bitumen. If
there is oil and additives in recipe, they can be added in the
premixing tank. The bitumen is heated by electric heating
system.
The polymer is mixed with
bitumen in the premixing tank by the agitator, and is produced
through the colloid mill.
Every batch can be circulated to
the tank through metering pump, clearing the sample
tank.
Technical
Characteristics
The same-structured colloid mill
with large scale production line and the mill gap can be adjusted
according to requirements
Equipped with soap water
flowmeter and control system, accurate measurement
Equipped with bitumen flowmeter
and control system, accurate measurement
Automatic electric heating
temperature control
Latex system available if needed
for SBR production
Heat exchanger available if
needed for SBS PMB emulsion
Computer monitoring system
available for recording and analyzing experimental
data
Components can be added to this
plant to produce foam bitumen
| بلد: |
China |
| نموذج رقم: |
pilot plant
|
| سعر فوب: |
0 ~ 100000 ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
China |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
1 Set |
| تفاصيل التغليف: |
ex work |
| موعد التسليم: |
60 days after signed order |
| القدرة على التوريد: |
1000 Set per Year |
| نوع الدفع: |
T/T, L/C |
| مجموعة المنتج : |
- |
