سعر فوب
أحصل على آخر سعر( Negotiable )
|10000 Piece Minimum Order
بلد:
China
نموذج رقم:
47mm/1600mm;58mm/1800mm
سعر فوب:
( Negotiable )أحصل على آخر سعر
الموقع:
China
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
10000 Piece
تفاصيل التغليف:
50kg/bag 24Mton/20'FCL load without palletized
موعد التسليم:
7 day after payment
القدرة على التوريد:
10000 Piece per Day
نوع الدفع:
L/C, T/T
مجموعة المنتج :
الشخص الذي يمكن الاتصال به Ms. Shirley
Room A-1509 International Trade Center No 230 Changjiangzhong Road, Qingdao, Shandong
The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat; this produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions.Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tube’s vacuum has been compromised.
Why a vacuum? As you would know if you have used a glass lined thermos flask, a vacuum is an excellent insulator. The vacuum eliminates a physical connection between the two glass layers of the tube which means there is nothing to transfer thermal energy so the heat cannot escape! This is important because once the evacuated tube absorbs the radiation from the sun and converts it to heat, we don't want to lose it!! The vacuum helps to achieve this. The insulation properties are so good that while the inside of the tube may be **0oC / **4oF , the outer tube remains within a few degrees of the ambient air temperature. This means that evacuated tube water heaters can perform well even in cold weather, when flat plate collectors perform poorly in these conditions due to heat loss.
In order to maintain the vacuum between the two glass layers, a barium getter is used (the same as in television tubes). During manufacture of the evacuated tube this getter is exposed to high temperatures causing the bottom of the evacuated tube to be coated with a layer of pure barium. Called a "getter", this barium layer actively absorbs any CO, CO2, N2, O2, H2O and H2 out-gassed from the evacuated tube during it's lifetime and increases the longevity of the vacuum. This barium layer also provides a clear visual indication of the vacuum status; the silver-colored barium layer turns white if the vacuum is lost making it easy to identify.
Evacuated Tube
Name |
Single target |
Double target |
Three target |
Material |
High borosilicate glass 3.3 |
||
CTE |
3.3×***6/k |
||
Thickness of tube |
1.6mm—2.5mm |
||
Absorptance |
≥0.*2 |
≥0.*1 |
≥0.*5 |
Emittance |
≤0.*7 |
≤0.*5 |
≤0.*5 |
Vacuum Tightness |
P≤3×***2Pa |
||
Anti-mechanical shock |
No damage under the shock of *0mm steel ball and the height of **0mm |
||
بلد: | China |
نموذج رقم: | 47mm/1600mm;58mm/1800mm |
سعر فوب: | ( Negotiable ) أحصل على آخر سعر |
الموقع: | China |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | 10000 Piece |
تفاصيل التغليف: | 50kg/bag 24Mton/20'FCL load without palletized |
موعد التسليم: | 7 day after payment |
القدرة على التوريد: | 10000 Piece per Day |
نوع الدفع: | L/C, T/T |
مجموعة المنتج : | Evacuated vacuum tube |