Gypsum board production line

سعر فوب

أحصل على آخر سعر

30000 ~ 90000 USD / Set ( Negotiable )

1 Set Minimum Order

بلد:

China

نموذج رقم:

XY-001

سعر فوب:

30000 ~ 90000 USD / Set ( Negotiable )(قابل للتفاوض) أحصل على آخر سعر

الموقع:

Tianjin

سعر الحد الأدنى للطلب:

30000 per Set

الحد الأدني للطلب:

1 Set

تفاصيل التغليف:

wrap film or wooden crate

موعد التسليم:

About 45days-60days

القدرة على التوريد:

نوع الدفع:

L/C, T/T

مجموعة المنتج :

Gypsum board production line

الاتصال الآن

Hebei Xiangyi Mechanical Co., Ltd

China

عضو مجاني

الشخص الذي يمكن الاتصال به Ms. Lisa

Jiulong, Shijiazhuang, Hebei

الاتصال الآن

مواصفات المنتج

Automatice:yes
Guarrenty:10 years
Constructure:Steel demolition/welded structure

الوصف

The main process of Gypsum board production line includes:

Put Calcined Gypsum powder, water and other additives to mixer by automatic metering system and conveying system, mix to form the Gypsum slurry, evenly scattered on the surface of the continous forward movement of the protective paper;
With continuous moving and vibrating, Gypsum slurry gradually diffused and evenly scattered on the surface of moving bottom paper. Then it goes into the Forming machine and compund with top paper. By the process of extruding and forming, the slurry would be sealed by top paper and bottom paper. Then pulpous continous plasterboard is formed.
While it conveyed by setting belt, wet Gypsum board gradually formed after board shaping, natual coagulation and automatic cutting. The wet boards arranged by programmed control system, quickly enter into dryer through rollers, belt conveyor and board turnover.
Under strict controls in temperature zones of dryer, the wet board dried by different temperature hot air blow. The wet board keeps evaporating, modified starch would stick with the paper, then the dry Gypsum board would be transported out of dryer.
Then the board will be turned over again and folded together(Face inward), cut the board to certain size and edge sealed.
Finally it comes to automatic stacker for stacking, then it can be transported to warehouse by forklift.

â€‹

SPECIFICATIONS GYSPUM BOARD MAKING MACHINE
Raw Material	gypsum powder	**0 mesh
	Paper	0gsm and 0gsm for gray paper and ivory paper
	modified starch	water reducer, white latex, etc.
	Glue	PVA emulsion
Gypsum Board Spec.	Length	Width	Thickness
	*0 to *0mm	*0mm, *0mm,	7mm to *5mm
	adjustable	adjustable
Product Quality Standard	In conformity with standard of P.R.C GB/T********8 paper-covered Plasterboard.
Fuel Variety	Coal, fuel oil, natural gas or liquefied petroleum gas.
The output of the Gypsum board producing line (Standard of our factory )	from 1.5 million to 0 million square metres annually (The estimated machine floor area is *******0 square meters.)
Machine Core component	PLC system/Automatic/ Different countries have different voltages
Type of Drying system	The hot air drying type	suitable for production lines with an annual output less than 5 million square meters; low cost and low investment.
Type of Drying system	Thermal oil drying type	Suitable for large and medium-sized production lines with an annual output more than 5 million square meters; Low energy consumption, higher cost, the service life is long, the quality is easy to control.
Application	Building material machinery
Installtion	We will dispatch technicians to install and debug the machine until it can normally produce qualified products.

Cases we served

Country	Production line description
Indonesia	Annual output of 5 million sqm Gypsum board production line in ***7
Uzbekistan	Annual output of 5 million sqm Gypsum board production line in ***7
Ukraine	Annual output of 4 million squm Mineral wood board production in ***0
Belarus	Annual output of 4 million sqm Gypsum board production line in ***7
Russia	Annual output of 3 million sqm Gypsum board production line in ***5
Kuwait	Annual output of 5 million sqm Gypsum board production line in ***7
Pakistan	Annual output of 3 million sqm Gypsum board production line in ***3
India	Annual output of 8 million sqm Gypsum board production line in ***7
Iran	Annual output of 3 million sqm Gypsum board production line in ***4
Iraq	Annual output of 6 million sqm Gypsum board production line in ***4

Application

Paper-facted Gypsum board has good toughness, non-combustible, stable size, smooth surface, can be sawn, easy to construction. Plaster board can be used as partition wall application, has good sound insulation ability, sound insulation effect is very good, can be compared to *4cm thick brick wall, gypsum board ceiling itself is made of gypsum of Paris as raw material, belongs to non-combustible material, fire safety performance is very good, raw material itself is porous material, also has good heat insulation effect, so its net weight is especially light, Only a third of the weight of a brick wall.

Advantage

Professional mechanical factory,*4 years production experience;
R&D department, can offer production line drawings and accept customization;
High-tech enteriprise, guarantee product quality;
Main market: Iran, India, Russia, Uzbekistan, Tajikistan etc.
Installation, we dispatch the installation engineer and teach you how it works;
After-sale sevice, we will be always at your service.

بلد:	China
نموذج رقم:	XY-001
سعر فوب:	30000 ~ 90000 / Set ( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	Tianjin
سعر الحد الأدنى للطلب:	30000 per Set
الحد الأدني للطلب:	1 Set
تفاصيل التغليف:	wrap film or wooden crate
موعد التسليم:	About 45days-60days
القدرة على التوريد:	-
نوع الدفع:	L/C, T/T
مجموعة المنتج :	Gypsum board production line