Industrial ultrafiltration water treatment plant/UF system in water treatment / water filtration machine

سعر فوب

أحصل على آخر سعر

1 Set Minimum Order

بلد:

China

نموذج رقم:

YK-1007

سعر فوب:

(قابل للتفاوض) أحصل على آخر سعر

الموقع:

China

سعر الحد الأدنى للطلب:

الحد الأدني للطلب:

1 Set

تفاصيل التغليف:

wooden case

موعد التسليم:

20Days after confirming the order

القدرة على التوريد:

1000 Set per Month

نوع الدفع:

T/T, L/C

مجموعة المنتج :

UF (ultrafiltration) system

الاتصال الآن

Fuzhou Yingke Water Treatment Engineering Co., Ltd

China

عضو مجاني

الشخص الذي يمكن الاتصال به Ms. Cindy

1-4 Bldg, 758# Qi'an Road, Cangshan District, Fuzhou, Fujian, China, Fuzhou, Fujian

الاتصال الآن

مواصفات المنتج

Package Type: Industrial ultrafiltration water treatment pla:Lead time:20days
Application: Filtration:Material: SUS304/316
Keywords: water purifier machine for commercial:Power supply: 220 / 380V

الوصف

Industrial ultrafiltration water treatment plant/UF system in water treatment / water filtration machine

How Ultrafiltration (UF) Systems Work?

Ultrafiltration (UF) systems have diverse membrane filtrations where hydrostatic pressure pushes solvents against a very fine membrane. They block suspended particulates and solids that are large while water and solutes with a lower molecular weight are allowed to flow through the membrane.

Industry and research employ this separation process for purifying and concentrating macromolecular (**3 - **6 Da) solutions, which are usually protein solutions. Ultrafiltration is similar to microfiltration, nanofiltration or gas separation, except it differs in the molecule sizes it blocks.

To meet critical discharge criteria, ultrafiltration systems remove the need for clarifiers and multi-media filters. Effective ultrafiltration systems use membranes that can be immersed, back-flushable, and air scoured. Spiral wound UF/MF membranes offer excellent performance for the clarification of process water and waste water.

Ultrafiltration (UF) Systems Advantages

Ultrafiltration (UF) membranes systems are more reliable than a conventional multi-media filter, which removed approximately *0 micron or larger of matter, where an ultrafiltration membrane pore size ranges from 0.*1 to 0.*0 micron. In addition to superior turbidity removal, UF membranes efficiently remove bacteria and most viruses.

- Superior filtration performance with high flux

- Very small nominal pore diameter (0.*3 µm)

- Efficiently removes bacteria and viruses

- Occasionally back washed and air scoured to boost performance and removing the fouling layer to extend operating life

- Low fouling membrane modules

- UF Outside-In or Inside-Out Configuration permits reduced plugging and higher solids loading

- Basic, vertical, modular design permits low cost, compact systems

- Effective membrane cleaning has a high chemical resistance and temperature tolerance

Advantages:

The multi-media water filter systems operate for much longer periods of time (five or moretimes as long at the same filtration rate) before backwashing is necessary because the bed can hold more turbidity. Turbidity is trapped and held throughout the entire bed depth, rather than the top one or two inches.

Multi-media filtration is much better suited for use in a closed pressure tank since cracking of the bed, and subsequent breakthrough of turbidity is virtually eliminated and the need for visual inspection is unnecessary. The use of pressure tanks (rather than open basins or filters) is an obvious advantage for point-of-use filtration and could also be of real importance in the filtration of small community water supplies. More rapid filtration flow rates in multi-media filtration allow the use of smaller diameter tanks with equal or better results. A very high degree of clarity is achieved in the filtered water because of the fact that the finer particles of garnet at the bottom trap finer turbidity particles.

Another important advantage is that multi-media water filters can clarify water at a much higher flow rate than a single-media sand filter. This is *4 to *5 gpm per square foot of bed area, as compared to 2 gpm per square foot of bed area. This is a very important difference in the production of filtered water.

Filter Media Types:

1. Manganese Greensand media is treated siliceous material for treating water containing iron, manganese and hydrogen sulfide through oxidation.

2. Anthracite is recommended as a filter medium where additional silica in the water is not desirable and can remove lighter weight turbidity. Anthracite is typically used in applications where silica pick-up is undesireable.

3. ProSand is based on a rare natural mineral. Its unique properties radically improve the performance and cost of media filtration.

4. Calcite media is specially graded calcium carbonate compound for neutralizing acid with consistent dissolving rates for water treatment.

5. Filter AG is non-hydrous silicon dioxide with many advantages for the reduction of suspended matter.
6. Activated carbon medium is used to remove taste, odor, organic contaminants, and chlorine as well as being used in many drinking water applications.

7. Sand is the most common filter media. Generally, fine mesh sand is coupled with a course grain support bed to remove suspended solids and turbidity. Graded in various ranges, CHUNKE sand can be used as filtration medium or underbedding depending on particle size and application.

8. Gravel has a highly spherical shape that promotes good flow and even distribution in support beds.

9. Multimedia is required when maximum quality water is required and unwanted sediment is too small to be removed by standard media. It consists of multiple layers of increasing grain size to remove sediment as small as *0 microns.

بلد:	China
نموذج رقم:	YK-1007
سعر فوب:	(قابل للتفاوض) أحصل على آخر سعر
الموقع:	China
سعر الحد الأدنى للطلب:	-
الحد الأدني للطلب:	1 Set
تفاصيل التغليف:	wooden case
موعد التسليم:	20Days after confirming the order
القدرة على التوريد:	1000 Set per Month
نوع الدفع:	T/T, L/C
مجموعة المنتج :	UF (ultrafiltration) system