سعر فوب
أحصل على آخر سعر|
- Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Ms. yu
136 Binjiang Middle St. Border Development Zone Dandong, Liaoning China, Dandong, Liaoning
DF****3(A) Inline Neutron Activation
Coal Analyzer is of modular structure, which can be installed
around the belt without the need to cut of the belt. When
DF****3(A) runs, the belt will slide on the inner bracket of the
measuring unit and all the materials passing through it will be
tested, with no contact with such materials during the whole
testing process, thus it has no influence on belt running.
DF****3(A) can present the testing results every one minute, thus
accurately analyzing the content of each element as well as
relevant industrial indexes. It carries effective supervision and
control on coal quality, with such features as no need to take
samples, full material analysis, high analysis accuracy, etc.,
which has efficaciously solved such problems as lagging coal
testing data, etc. By analyzing real-time detection information, it
can conduct effective control on the production process, improve
production technology, reduce production costs and raise product
quality.
Principle:
DF****3(A) adopts prompt gamma neutron activation analysis (PGNAA)
technology. After the nucleus captures the neutrons, it will be in
the excitation status. Upon de-excitation, characteristic gamma
rays corresponding to the nuclide will be emitted. By analyzing the
gamma energy spectrum, the composition content of the materials
under measurement can be got.
Technical parameters:
1.Measurement parameters: ash content, moisture, sulfur content,
SiO2, Al2O3, Fe2O3, CaO, MgO, Na2O, K2O, etc.
2.Calculation parameter: calorific value and any possible
parameters that can use empirical equation.
Product application:
1.Classification & Piling
DF****3 (A) system can be used jointly with the process control
software, so as to classify the materials, sort the coals with
higher calorific capacity to the maximum and improve the effective
utilization of various resources in the mine area.
2.Coal blending
DF****3(A) can be used jointly with the automatic batching software
to carry out the coal material blending control in such industrial
enterprises as coal mines, coal washeries, power plants, etc.
Weighing instrument and analyzer can send current detection results
into the batching software, and the latter then controls the
feeding amount of each raw material feeder according to the target
values of quality control parameters (calorific value, sulfur
content and ash content) as set up by the users, so as to make the
batching satisfy the quality control requirements. The batching
software can also adopt manual mode. The feeding amount of each
coal source can be controlled through the intercommunication
system, thus guiding coal blending.
بلد: | China |
نموذج رقم: | - |
سعر فوب: | أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | - |
تفاصيل التغليف: | - |
موعد التسليم: | - |
القدرة على التوريد: | - |
نوع الدفع: | - |
مجموعة المنتج : | - |