الوصف
Features:
1. can be used on the wet surface
of the basic construction
2. strong bond with the substrate,
the active ingredient in the slurry can penetrate the pores and
micro-cracks in the cement-based surface, and produce a chemical
reaction with the substrate to form a fine crystal integrated
waterproof layer
3. can follow up directly after the
slurry dry and with no mortar protective layer
4. can be the waterproof both for
the positive and back sides.
5. good ventilation and keep the
surface dry
6.excellent aging resistance
7. non-toxic, harmless, and
environmental-friendly product
Application:
1. the waterproof for indoor and
outdoor concrete structure, precast concrete structure, mortar,
brick wall and so on
2.hydraulic projects, power
stations, factory warehouses, food storehouses, tunnels,
kitchens, underground car parks, drainage and walls, floors,
swimming pools, water tank and other mortar based layer of
waterproof projects
3. can be used as the basic layer
for K*1 high flexible waterproof slurry
Surface Treatment:
1. the surface should be stable,
clean, smooth, no dust, no oil, no shedding, and other detrital
materials
2. the obvious pore and hole must
be silted up by the cement mortar, the sharp edges should be
wiped out, recommend the cement mortar additive that mixed MB
NO.3 slurry
3.if the surface is dry, moist
the surface with clean water till there is no clear water before
operation
Operation Process:
1. pouring the additives into the
container, and then slowly pour the powder and stir them into a
uniform powder-free and with no deposit paste
2. using brush or roller brush the
slurry on the surface directly, brushing with horizontal and
vertical direction in order to avoid leaking anywhere
3.mixed ratio: *5kg powder + 9kg
additive
4. during the operation, keep
intermittent stir to avoid precipitation
Normal Amount:
for water proofing, the brushing
thickness is about 1.2~1.5mm, about *5~*0m2/flat
(Note: the above amount is
based on flat surface)
Cautions:
1. do other covers after the
waterproof layer totally dry.
2.for a better effect, do not
operate under *5℃
or particularly damp and
unventilated situation, if necessary, use fans to dry
3. never mix the dry slurry with
water and use again
Store Method:
Store in cool and dry place,
unopened product can be saved for one year.
Packing:
*5kg powder + 9kg additive
2 in 1: 3.6kg powder + 1.4kg
additive, 1kg powder + 0.4kg additive, *5kg powder + 5kg
additive
| بلد: |
China |
| نموذج رقم: |
Mebong MB-K11 Genera
|
| سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
Guangzhou |
| سعر الحد الأدنى للطلب: |
- |
| الحد الأدني للطلب: |
1 ton |
| تفاصيل التغليف: |
- |
| موعد التسليم: |
- |
| القدرة على التوريد: |
500 tons/ month |
| نوع الدفع: |
- |
| مجموعة المنتج : |
Mebong Waterproof Series
|
