سعر فوب
أحصل على آخر سعر( Negotiable )
|1 Set Minimum Order
بلد:
China
نموذج رقم:
MJX-100B/160/250B-Z
سعر فوب:
( Negotiable )أحصل على آخر سعر
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
1 Set
تفاصيل التغليف:
box
موعد التسليم:
-
القدرة على التوريد:
100 Set per Week
نوع الدفع:
T/T
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Ms. Yang
Unit 305 1st Building,No.2101 Wu ning Road,Shanghai,China, Shanghai, Shanghai
â… Summary
MJX model mould incubator is a high precision constant temperature
incubator withheating and cooling control. It is applicable for the
plant cultivating, testing of seedbreeding, cultivating and storing
the bacteria, mould, microorganism, analyzing waterand BOD
measuration. It is applicable in biologic descendibility project,
medical college,sanitation epidemic prevention, medicine testing,
farming and fisheries institutes forresearch.
â…¡ Structure
The body of equipment is made of high quality sheet, the outer
paint coating is firmand artistic. The double insulating glass
observation window is equipped on the door.Equipped with UV light
for sterilization. Interior chamber with four arcual corners ismade
of mirror stainless steel sheet, so that the temperature uniformity
in chamber isgood, and the equipment wears well, and it is easy to
clean. Humidity adopts naturalevaporation.Temperature control part
adopts singlechip technology advanced type intelligentdigital
display temperature controller. User can set and adjust temperature
and time byoperating touch s on control panel according to
the different requirements to reachthe aim of experiment.
â…¢ Principle of Operation
Mould incubator transforms the actual temperature felt by
temperature sensor inchamber to electrical signal, and control the
work of heater and compressor bymicrocomputer to reach the required
temperature.
â…£ Technical Parameter
1. Volume: **0, **0L, **0L;2. Temp. range: 5~*0℃;3. Temp.
floctuation: ±1℃(**0L, **0L), ±1.5℃(**0L);4. Temp. uniformity:
±1.5℃(**0L, **0L), ±2℃(**0L);5. Power supply: AC **0V/*0HZ;6.
Power consumption: **0W(**0L, **0L), **0W(**0L);7. Work ambient:
Ambient temp.:*0~*0℃; Relative humidity ≤*0%;8. Refrigerant:
R*2;9. Equipment class: Sort I Model B.
â…¤ Installation
1. Install the equipment indoor where is ventilated and dry and has
no direct sunlight.The equipment should be placed at a distance
from the wall above *0cm.2. Adjust the incubator with adjusting
screws on the bottom to make it stable.3. The equipment uses
AC**0V/*0Hz power supply. Power supply circuit must havereliable
earth wire to ensure the safe use.
VI Method of Use
~1. Connect the power supply and turn on the power switch, and
setting of temperatureand time can be operated at this time.2.
Temp./Time is used for switch temperature and time1)
Temperature set: press Temp./Time , temperature set indicate
light will beon, press Set and enter SV state, a digit in
set display screen will flash, pressMove (<) to move the
flashing digit to you need, then press ∨ or ∧ to changetemperature
set value to you need (min. is 0.1℃), press Set to save
the set value.The left screen displays measured temperature, the
right screen displays set temperature.2) Time set: press Temp./Time
, time set indicate light will be on, press Set and
enter TV state, a digit in set display screen will flash, press
Move (<)to move the flashing digit to you need, then press
∨ or ∧ to change time set value toyou need (min. is 1h), press Set
to save the set value. The left screen displaysmeasured
time, the right screen displays set time.Timing function: timing
function starts after the equipment works. Output will beclosed
after timing ends. Heater and compressor stop work, and temperature
in chamberwill reach ambient temperature gradually.3. State
indicate: the equipment will run accord with set parameters after
set is finished.When measured temperature is lower than set
temperature, the equipment enter theheating state, and heating
indicate light will be on. When measured temperature is higher than
set temperature, the equipment enter the refrigeration state, and
refrigerationindicate light will be on. When measured temperatuer
is higher than set temperature over4℃, alarm indicate light will
be on with buzzer beeps.4. Parameters amending: if temperature and
time parameters need amended whenequipment running, follow step 1
and step 2.5. Rapid set: when set parameters, press ∧ to
increase set value, keep the pressed for 3 sec to increase
the set value continuously. Press ∨ to decrease setvalue,
keep the pressed for 3 sec to decrease the set value
continuously.â…¦ Notice and Maintenance1. When convey incubator,
keep upright or horizontal less than *5 degrees.2. Don’t change the
setting value continually in use to avoid over loading occurred
bycontinual startup of compressor and affect the use life of the
equipment.3. The equipment is installed two groups of fuse. If
malfunction occurs when running,please cut off the power first and
check the fuse, then check other parts.4. Don’t wipe the outer with
corrosive solution to keep the equipment clean. Wipe theinner with
dry cloth or alcohol to keep the inner clean.5. Keep the inner
chamber dry and cut off the power when the equipment is not in
use.6. Check frequently whether the screw type ventilator inner is
in normal operation toensure the temperature uniformity inner.
Don’t place items too closely in chamber andblock the uptake of fan
when testing to make for air circulation in chamber.7. Don’t touch
and collide the temperature sensing probe to cause the temperature
out ofcontrol.8. When malfunction occurs, user should not overhaul
arbitrarily, but invite aprofessional to maintain or contact our
department of sale.9. Our products practise “Three guarantees”.
From the date of sold, we will maintain theequipment free if any
quality problem within one year (except artificially damaged).
Ifexceed the period of “Three guarantees”, we will charge repairs
fee as appropriate.
بلد: | China |
نموذج رقم: | MJX-100B/160/250B-Z |
سعر فوب: | ( Negotiable ) أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | 1 Set |
تفاصيل التغليف: | box |
موعد التسليم: | - |
القدرة على التوريد: | 100 Set per Week |
نوع الدفع: | T/T |
مجموعة المنتج : | - |