الوصف
Characteristics:
* Paper leading with Vacuum absorb model, have high-pressure
& strong fan motor. The flow of fan can be adjusted, and have
silencer; The electric control system fastens on a electrical
case, which has min. 1.5meter distance from equipments, the
operation side is completely independent.
* Gimble drive system, separated structure and independent drive
case. Closed gear drive system with oiling lubrication, the usage
life of the gears is highly prolonged.
* Machine base and wallboard is cast iron structure, thickness of
the wallboard is **0mm.
* Corrugated Roll: Material of corrugated roll is *2CrMo alloy,
which is dealt with quench, surface polish. Diameter of roll is Ø
**0mm, surface hardness is more than HRC*0. The adjust of up and
down of roll is pneumatic controlled.
* Press roll: Diameter is Ø**0mm, surface is worn down and
chromeplated. The adjust of up and down of roll is pneumatic
controlled, material is Carbon Iron *5#, dealt with confection.
* Pre-heater Roll: Diameter is Ø**0mm, surface is worn down and
chromeplated. All are connect with soft metal pipe.
* The bearing of corrugated roll and press roll are lubricated
and high-temperature resistant.
* Glue supply and quit is pneumatic controlled, diameter of glue
roll is Ø**0mm, surface of roll has concave netted rind, surface
polish & chromeplated. Surface of adjust roll is surface
polish & chromeplated.
* Use electrical glue separate equipments, the glue part can run
independently when the main motor stops, this can avoid the dry
of the glue.(Choose by customer.)
* Middle height of corrugated roll is 0.*0mm, middle height of
press roll is 0.**5mm. Have place limit equipment, diameter of
tighten cylinder is Ø**0mm.
Technological Parameters:
1. Working width: ***0mm, ***0mm, ***0mm,***0mm.
2. Design speed: **0m/min.
3. Operation direction: Left or right (design as customer’s
workshop.)
4. Gas: 0.**0.9Mpa.
5. Steam pressure: 0.**1.3Mpa.
6. Flute: UV or UVV model, can design as customer’s requirement.
Diameter of the rolls:
1. Corrugated Roll: Ø**0 mm
2. Press Roll: Ø**0 mm
3. Gluing Roll: Ø**0 mm
4. Pre-heating Roll: Ø**0 mm
Drive Power:
1) Main Motor: *1KW, **0V, *0HZ
2) Fan Motor: *5KW, **0V, *0HZ
HS CODE: ********0
| بلد: |
China |
| نموذج رقم: |
MJSF-320FX
|
| سعر فوب: |
100000 ~ 150000 / Set ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
China |
| سعر الحد الأدنى للطلب: |
100000 per Set |
| الحد الأدني للطلب: |
1 Set |
| تفاصيل التغليف: |
hard wooden case |
| موعد التسليم: |
within 20 days after received deposit |
| القدرة على التوريد: |
40 Set per Month |
| نوع الدفع: |
T/T, L/C |
| مجموعة المنتج : |
- |
