Ordinary Portland Cement (OPC)

الوصف

Portland cement (often referred to as OPC, from Ordinary Portland Cement) is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement (more than *0%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents as allowed by various standards such as the European Standard.

In order to achieve the desired setting qualities in the finished product, a quantity (**8%, but typically 5%) of calcium sulfate (usually gypsum or anhydrite) is added to the clinker and the mixture is finely ground to form the finished cement powder. This is achieved in a cement mill. The grinding process is controlled to obtain a powder with a broad particle size range, in which typically *5% by mass consists of particles below 5 μm diameter, and 5% of particles above *5 μm. The measure of fineness usually used is the "specific surface area", which is the total particle surface area of a unit mass of cement. The rate of initial reaction (up to *4 hours) of the cement on addition of water is directly proportional to the specific surface area. Typical values are *****0 m2·kg−1 for general purpose cements, and *****0 m2·kg−1  for "rapid hardening" cements.

We PIONEERS GLOBAL OIL & GAS SERVICES, hereby confirm that we are direct supplier of PORTLAND CEMENT and the specifications are in accordance with  international standard. We are ready and willing to deliver to your demands. We have Russia,Ukraine & Europe Origin
We are capable to supply you with own desire label