paper enzyme AU-PE89

الوصف

AU-PE*9 Xylanase is an enzyme that degrades xylan and it is used for paper and pulp bleaching.

AU-PE*9

Xylanase for Improved Bleaching of Paper Pulps

 INTRODUCTION

Xylan is a major component of wood and non-wood fibres. During cooking of pulps, the xylan is partially dissolved, modified and re-precipitate onto the fibre surface. The application of the enzyme, xylanase, to the cooked pulp removes some of the re-precipitated xylan. This opens up the pulp matrix, allowing the release of trapped soluble lignin. At the same time it allows bleaching chemicals to penetrate more effectively. The overall result is improved bleachability of the pulp with resulting reduction in usage of bleaching chemicals.

AU-PE*9 Xylanase is an enzyme that degrades xylan. AU-PE*9 is specific for xylan and does not degrade cellulose. Xylanases produced by different microorganisms operate optimally over a range of pH and temperature. AU-PE*9 was developed from a proprietary strain of bacterium for the paper pulp industry. AU-PE*9 is particularly suited to the elevated temperatures and alkaline pH of kraft pulps.

The manufacturing process involves growing a specific proprietary bacterium in bioreactors (fermenters), separating the cells from the broth, and concentrating the clarified liquid. The product is prepared as a concentrated liquid or light brown powder.

TECHNOLOGICAL ADVANTAGE

AU-PE*9 acts as a pre-bleaching aid for paper pulps. AU-PE*9 has specific advantages in that it is stable and active at the alkaline pH and elevated temperatures typical of kraft pulps.

The main driving factors for acceptance of this technology in pulp mills have been the economic and environmental advantages over chemical bleaching.

AU-PE*9 used as a pre-bleaching agent for wood and non-woody pulps can reduce chemical bleach consumption from between *5 to *0%.

PRODUCT DESCRIPTION
AU-PE*9 is a product derived from the culture of a strain of Bacillus subtilis. The principal active ingredient of AU-PE*9 is xylanase (endo*1,*-β-xylanase, EC 3.2.1.8), an enzyme that degrades and solubilizes plant xylans.

AU-PE*9 is prepared with a xylanase activity of about *5,**0 XU/mL. The xylanase units are determined on birchwood soluble xylan at pH 6 and *0°C over a *0 minute period. AU-PE*9 xylanase is effective over the pH range 6 to *0 and temperature range *5 to *5°C

AU-PE*9 is a light yellow powder with a density of 1.1 g/mL. It is readily miscible with water. 

BENEFITS OF AU-PE*9

Reduce Organochlorines in Wastewater:
For mills using active chlorine as a bleaching chemical, AU-PE*9 can eliminate or substantially reduce the chemical and environmental load of toxic organochlorines in mill effluent.

Reduce Chemical Costs:
For mills using environmentally friendly bleaching agents such as hydrogen peroxide, AU-PE*9 can result in a significant cost saving.

AU-PE*9 has the potential to reduce bleaching chemical by*5 to *0%.

Increase Pulp Production Capacity:
Pre-bleaching pulps with AU-PE*9 allows pulp production capacity to be increased where on-site chlorine dioxide production is a limiting factor.

Higher Pulp Brightness:
For a given dosage of bleaching chemical, pre-bleaching with AU-PE*9 can give a higher brightness pulp, thus providing the mill with a better quality paper.

AU-PE*9 can increase the pulp brightness by 2 to 6%.

Easily Incorporated:
AU-PE*9 is easily incorporated into existing bleach lines. Typically, installation requires only a mixing tank and dosage pump.

Reduce Effluent Load:
Application of AU-PE*9 in the bleach plant can reduce COD, BOD and color of effluent.

AU-PE*9 can significantly reduce COD, BOD and color of effluent.           

APPLICATION

AU-PE*9 xylanase can be added to pulp after cooking or oxygen delignification and prior to bleaching for the improvement of pulp bleachability. Almost every mill has unique conditions of fibre furnish, pulping technology and bleach sequence. The optimal dosage can also depend on the temperature, pH and consistency of the pulp. Application protocols for AU-PE*9 can be tailored to best suit the specific process. However, the following general application optimal conditions apply.

Dosage:               ****0g/ T pulp (o.d.basis)
Pulp properties:   pH between 6.5 and9.5
Temperature:         between *5 and *5°C
Pulp consistency:  between 6 and *0% (recommended 8%)
Residence time:   above 1 hour

STORAGE
AU-PE*9 maintains its stated activity for at least six months when stored at temperatures below *5°C. The product maintains its activity for considerably longer when stored at lower temperatures. The product should not be frozen.

HANDLING PRECAUTIONS
AU-PE*9 is non-toxic and biodegradable. However, unnecessary contact with the product should be avoided. Long term exposure to protein based products such as AU-PE*9 may sensitise certain individuals to the product