سعر فوب
أحصل على آخر سعر|
300 Piece Minimum Order
بلد:
China
نموذج رقم:
RP7431
سعر فوب:
الموقع:
China
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
300 Piece
تفاصيل التغليف:
Color Box
موعد التسليم:
Within a month
القدرة على التوريد:
20000 Piece per Month
نوع الدفع:
T/T
مجموعة المنتج :
الشخص الذي يمكن الاتصال به Mr. Benny
Luqiao,pengjie, Taizhou, Zhejiang
Description :
1. Twin hammer mechanism has 2 identical hammers that deliver an instantaneous balanced blow, reducing vibration and transferring more torque to the drive end of the anvil than any other mechanism on the market.
2. Twin hammer mechanism provides more power and smooth balanced blows.
3. (screened filter) air inlet keeps dirt and debris from damaging the tool.
.
RongPeng Air Tools Professional Impact
Wrench:
| Model No | RP***1 |
| Square Drive | 1/2" |
| Capacity Bolt Size | 5/8" *6mm |
| Free Speed RPM | ***0 |
| Working Torque | **0Ft-Lb/**0N.m |
| Overall Length | 7.3"/**5mm |
| Air Inlet(NPT) | 1/4" |
| Air Hose(ID) | 3/8" |
| Avg.Air Consumption | 5cfm/**2.5l/min |
| Net Weight | 5.7Lbs/2.6Kgs |
| Sug.Air Comp(HP) | 3 |
Air Tools Trouble Shooting:
| Air tools runs at normal speed, but loses under load |
1.Motor parts worn 2.Cam cluth worn or sticking due to lack oflubricant |
1.Lubricating clutch housing. 2.Check for excess clutch oil. 3.Clutch cases need only be half full Overfilling 4.Can cause drag on high speed clutch parts,is a typical oiled/lubricated wrench requires 1/2 ounce of oil |
| Air tools runs slowly, Air flows slightly from exhaust |
1.Air tools's motor parts jammed with dirt particles 2.Power regulator in closed position Air flow blocked by birt |
1.Check air inlet filter for blockage. 2.Pour air tools lubricating oil into air inlet as per instructions. 3.Operate tool in short bursts quickly reversing rotation back and forth where applicable.Repeat above as needed.Air |
| Air tools will not run, Air flows freely from exhaust | 1.One or more air tools's motor vance stuck due to material build up |
1.Pour air tools lubricating tool into air inlet 2.Operate tool in short bursts of forward and/or reverse rotation where applicable 3.Tap motor housing gently with plastic mallet 4.Disconnect supply. Free motor by rotating drive shank manually where applicable |
Air tools will not shut off |
1.Air tools's "O" rings throttle valve dislodged from seat inlet valve | 1.Replace air tools's"O" ring |
| بلد: | China |
| نموذج رقم: | RP7431 |
| سعر فوب: | أحصل على آخر سعر |
| الموقع: | China |
| سعر الحد الأدنى للطلب: | - |
| الحد الأدني للطلب: | 300 Piece |
| تفاصيل التغليف: | Color Box |
| موعد التسليم: | Within a month |
| القدرة على التوريد: | 20000 Piece per Month |
| نوع الدفع: | T/T |
| مجموعة المنتج : | Air Tools |
