Styilong YL-48HC Intelligent Sec Count Controller

الوصف

Features

1)Output:One for main control and one for advanced amount aid control.With the function of advanced amount aid,it can meet the demand of two independent output control,and to control the external circuit outputs asynchronously or synchronously.Or,it just works as a sec counting controller,as well as to alarm in advanced.

2)Input Signals:Contact switches, the level switches, photoelectric switches, proximity switches, meter wheel sensor signals, etc.They can not only count numbers in a high speed,but also count the length.With the  rich functions and simply interface,it is widely used in many working environments.

3)When the count controller count to the setted advanced value,"FRON" output a voltage signal,DC*2V,and keep this until the master relay count to the setted value,the master relay "OUT"stop the output,then reset with "FRON" automatically or manually at the same time,and start to count again.

4)When the count controller is setted as in the state of clear automatically,keeping length of "OUT"of the master relay can be setted in advanced.The range of time delay is 0.**9.9s,and when the time is delay to the setted one,the relay disconnects,the count controler clear and reset,then start to count again.  

5)Step setup process is equiped in the count controller,so it can use the mechanical turntable or transfer roller directly,instead of the meter wheel,to count the number and length.The precision is 0.1mm,can meet the different range of length precision.

Technonical Paraments

1)Working power:AC **0V,±*0%;*0Hz,±1Hz.

2)Output relay contact:**0VAC/3A(resistive) ,**0V/1A(conductive).

3)Time to keep data after power off:>*0 years.

4)Impedance of signal:≥5kΩ.

5)Sensor signals:Photoelectric switches, proximity switches, Hall-effect switch, pulse signal meter wheels,ect(PNP/NPN can be choosen).While relay,limit switches and micro switches are contact signals with non-voltage.