Styilong YL-6TB Temperature Controller

الوصف

 YL*6T serise has got CE certificate. Specification (Selectable)     

YL*6TBR:the controlling of output is relay contact **0V/DC(standard)     
 YL*6TBS:the controlling of output is impulse voltage *2VDC(standard)      
YL*6TBI:the controlling of output is constant current ***0mA/DC(standard)       
YL*6TBU:the controlling of output is constant voltage **5V/DC(standsrd)

Features

1.One dedicated output way:self regulating temperaturecontrol ( P, I, D ); One time-delay control output.

2.Main ways to control temperature:self regulating control P,I,D(standard),upper-lower limit range control.Only one way can be chosen.

3.Time-delay control ways:After temperature reach the setted point,time-delay function will start to work automatically.Also,users may choose to touch off external , switch, foot pedal switch ( Note: without voltage) during the temperature control process at any time,activating time-delay function.

4.With the contact points,external , switch and foot pedal switch ( Note: without voltage),users also can connect the output signal to the counter, to increase the automatic counting function of mechanical equipments.

5.Standard type K equipped thermocouple conductive signal,measuring range is the maximum value of index number.

6.The deviation can be corrected,and the cold side of sense-transfering line can test the temperature alone.The amplifier of the cold side can return to zero by itself,the precision is ±0.5%FS.

7.Main outputs:(selection in YL*6T series)

"R"*-Relay controlling AC contactor

"S"*-Impulse zero triggering SSR

"I"*-Current output ***0 mA,impulse triggering Voltage-regulator

"U"*-Voltage output **5 VDC,impulse triggering Voltage-regulator

8.One independent alarm output can be added,4 kinds of upper-lower limit alarm ways can be regulated freely.

Technical Parameters

1.The precision of setting:±0.5% FS±1 during the whole measuring range.

2.The precision of measuring:±0.2% FS±1.

3.The frequency of sampling:2 times/sec.

4.Standard signal (single) :K.

5.The ways of controlling temperature:

(1) Intelligent setting:factory Initial setting P,I,D.

     But when the temperature is fluctuating around the critical point,the value of P,I and D can be adjusted.

(2)Upper-lower limit controlling:modify P=0,and set "HY"(the *9th item in the third level of menu) as what you need to control the section,and set "Fr" as "0".

6.Output controlling:

(1)The analog quantity:"I"*-Impulse current output ***0 mA.

                                     "U"*-Voltage output **5 VDC. 

(2)The swich quantity:"S"*-Impulse voltage *2VDC.

                                    "R"*-Relay controlling AC contactor.

7.Time-delay fuction:"second","minute" time range can be chosen:****9s and ****9m.

8.Time-start function:Time-delay automatic control or manual control.After the temperature reach the setted point,time-delay function will start to work automatically,while manual time-delay can activated by external .

9.Relay contact loading:**0VAC/3A (not conductable), **0VAC/1A (conductive,CosΦ=0.4).

8.Impulse voltage loading:*2VDC, max=*0mA(impulse SSR,with protection of short circuit).

9.Analog voltage and current loading:(standard)**5VDC,***0mA,loading resitance Max=**0Ω.

*0.Alarm funtion:4 kinds of alarm of deviation value for upper and lower limit,the absolute value of alarming funtion  for upper and lower limit is free to combine.

*1.Alarming output loading:relay contact **0VAC/3A (not conductive), **0VAC/1A (conductive,CosΦ=0.4).

*2.The waste of voltage:*****0VAC,****0Hz,≤5W.

*3.Insulating resistance:≥*0MΩ(testing condition is **0VDC),(the main output is current or non-contacted

 voltage,the resitance of its  (or output)terminaller and CT terminaller don't need to be tested.

*4.The temperature and humidity of the working environment:

temperature:**0~**5°c,humidity:****5% RH.