SUGON T3602 Soldering Station with JBC T115 T210 iron tips

الوصف

SUGON T***2 2 In 1 soldering station with JBC **5 **0 soldering iron tips and double soldering handles. SUGON T***2 SMD lead free soldering BGA rework station mobile phone welding tool for phone PCB motherboard IC BGA soldering repair.



Features:

1.SUGON T***2 2in1 Soldering Station

2. LCD digital display

3. Accurate temperature control

4. 1S Rapid Heating

5. Independent control of A/B zone

6. Lead-free Soldering Station

7. 2 in 1 soldering iron tip,master Level

8. Two independent soldering iron handle plug settings

9. No influence, no interference, more convenient;

*0. Two soldering iron tips can be used separately at the same time for different maintenance operations



Specifications:

Model: SUGON T***2.

Power Consumption: **0W.

Input Voltage: AC **0V / AC **0V *0/*0Hz.

Range of Temperature: Decide by working mode(**0℃***0℃ / **2°F***2°F).

Temperature Stability: ±2℃/Without air flow and no load.

Tip to Ground Resistance: <1Ω(DC).

Tip to Ground Potential: <*5mV(True RMS).



Note:

1. A soldering iron corresponds to A "SET" key, and B soldering iron corresponds to B "SET" key.

2. T***2 needs less than 5% power to maintain a constant temperature of **0 degrees Celsius. The use of low power can extend the life of the soldering iron tip and reduce the consumption of the soldering iron tip.



Operation guide:

1. In the working state, long press the "SET" key in the A/B area to enter the temperature calibration setting state interface.

2. Press "▲▼" to adjust and correct the temperature. After setting, press the "SET" key again to save and exit the temperature calibration function, and enter the working state.



Option:

1. Standard set: with 2pcs JBC iron tips (1x JBC C**0 iron tips + 1x JBC C**5 iron tips).

2. Full set: with 6pcs JBC iron tips: 3x JBC C**0 iron tips(C******0/**8/**2) + 3x JBC C**5 iron tips (C******1/**2/**8).