tape applying wrapping machine for the steel pipeline

سعر فوب

أحصل على آخر سعر

150 ~ 300 / Piece ( Negotiable )

1 Piece Minimum Order

بلد:

China

نموذج رقم:

XUNDA T100

سعر فوب:

150 ~ 300 / Piece ( Negotiable )(قابل للتفاوض) أحصل على آخر سعر

الموقع:

سعر الحد الأدنى للطلب:

150 per Piece

الحد الأدني للطلب:

1 Piece

تفاصيل التغليف:

carton

موعد التسليم:

5-7days

القدرة على التوريد:

1000 Piece per Month

نوع الدفع:

T/T, L/C

مجموعة المنتج :

XUNDA T100

الاتصال الآن

Jining Xunda Pipeline coating materials Co., Ltd

China

عضو مجاني

الشخص الذي يمكن الاتصال به Mr. Spark

Chenguang Road, No. 1, Rencheng Industry District, Jining, Shandong

الاتصال الآن

مواصفات المنتج

Other Names:pipe wrapping machine
Place of Origin:Shandong, China (Mainland)
Color: Black
Packing:carton
Life:3-5years
using:tape wrapping

الوصف

tape applying wrapping machine for the steel pipeline

Semi automatic wrapping machine for rolls is popular used for large steel pipe, also be called automatic wrapping machines, taping machine.

The XUNDA tape wrapping machines are designed for improving the tape wrapping application performance.
It includes a automatic tape wrapping machine and a hand tape wrapping machine.
Machine Composition

Automatic Tape Wrapping Machine
The automatic tape wrapping machine is designed for holding the pipe and rotating the pipe. You can wrap the tape by hand during the turning of the pipe or us the Xunda hand wrapping machine . Range of machines available to wrap pipe diameters *******0mm.

Hand Tape Wrapping Machine
The hand tape wrapping machine is designed for wrapping the Xunda tape with constant tension and overlap. The machine relies on the tension on the tape to hold it in position during operation. Range of machines available to wrap pipe diameters ******0mm. Range machines available to wrap of the tape width *0mm***0mm.

Product use:

1) Steel pipe pretreatment
1.1 Keeping the pipe external surface clean and dry.Remove the dust, oil, welding slag, burrs, grease and dirt on pipe surface.
1.2 Pipe surface prepared up-to a level of Sa 2 or 2 ½ or St 2/st by sand blasting.
1.3 After the precleaning operations, the pipe surface not smoothwhich may sharp the pipe coating should be burnished , the abrasive dust attached on the pipe surface should also be cleaned clearly.
1.4 If flash rusting occurs, the surfaces must be re-cleaned by blasting as above.
2) Coating &Wrapping application
2.1 Coating &wrapping application consist of primer application, inner tape coating ,outer tape coating .
2.2 weather condition
2.2.1 When the wind&sand was strongly, when the sand and dust covered on the surface of pipe, primer ,tape etc., should not be brushing primer and wrapping the tape if there is no reliable preventive measures.
2.2.2 When air humidity is greater than *0%,or when the pipe surface is wet from any precipitation, should not be brushing primer and wrapping tape.
3) Brushing primer
3.1 The brushing time should be control within 6 hours between the pipe surface treatment and brush primer During brush primer, pipe surface should be free from damp and pollution. If the pipe surface
rust return, should be re-pre-cleaned.
3.2 The primer should be mixed evenly in the container before brushing.
3.3 The primer should be applied uniformly, without any sags, floods, runs, drips, bare spot and over spray,
such as leakage brush, clot, streaming. The primer coat DFT shall not be less than ****0micron (**2mils)
3.4 After the primer dried, then wrapping the tape(It usually takes 3to 5 minutes.).
3.5 Consumption:
machine applicationapprox. 0,1 litre/m²
hand applicationapprox. 0,2 litre/m²
4) Wrap tape application
4.1 Wrap tape application consists of hand application and machine application.
4.2 The tape applied temperature must be above 5 degrees,the coating construction temperature shall be
more than *5 degrees as better .
4.3 The tape shall be spirally applied ,minimum overlap shall not be less than *0%.
4.4 When a new roll of tape started ,the ends shall be located to ensure the continuity of wrap tape using the
same method of application.
4.5 Outer tape applied method is the same as above.
5.Cutbacks
Cutbacks shall be a minimum 6inches(**0mm) from the ends of each pipe.The cutbacks may be tapered
or straight edge for the total thickness of the coating.
Feature:
1) Have the steel pipe fixed in the air or placed on the spot of line pipe
2) Remove rust by manual steel wire brush and then primer
3) Clamp the manual winding machine on the steel pipe, adjust the angle of pinch roller according to the
joint requirements, place the adhesive tape in scroll device (without translator)
and wind the aid handle outside of rolling machine

FAQ:

1. What is the payment terms.
     T/T (Telegraphic Transfer) , L/C at sight,Western Union

2. What is the delivery time of the tape.
   Usually , 7 days after payment, but it will cost more time when a large order made.

3. Whether the sample is free or not.
    The sample will be free with one patch or a small roll . It should paid when you ask for large quantity samples.

4.What is your qualification.
   We are the manufacturer of anticorrosion tape for *8 years. All our products are ISO,DVGW, SGS,AWWA approved.we are the membership supplier of SINOPEC, CNOOC ,CNPC. Our products had exported to more than *0 countries.

5. What is your after-sales service.
    1). Quality reponse
2). Providing technical proposanl and feld application  training
3).Product replacement if it is the quality problem.

Want to know more details, please contact us:
Contact :Nancy Song
Skype:nancysong7
whatsapp:**************4
**************5
wechat(QQ):********3

بلد:	China
نموذج رقم:	XUNDA T100
سعر فوب:	150 ~ 300 / Piece ( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	-
سعر الحد الأدنى للطلب:	150 per Piece
الحد الأدني للطلب:	1 Piece
تفاصيل التغليف:	carton
موعد التسليم:	5-7days
القدرة على التوريد:	1000 Piece per Month
نوع الدفع:	T/T, L/C
مجموعة المنتج :	XUNDA T100