الوصف
>
Material: Stainless Steel **6 or Carbon
Steel
>
Size: 1/4 inch 4 inch - **3/4×*4 inch
Turnbuckles are the device for tightening a rod or wire rope. Its
parts are sleeves with a screwed connection at one end and a swivel
at the other. The ends are hook, eye, and clevis. The turn-buckle
can be connected at any convenient place in the rod or rope, and
several may be used in series if required.
Stainless Steel - from small turnbuckles to
larger assemblies **6L stainless turnbuckles offer high corrosion
resistance and durability with standard UNC threading to
interchange turnbuckle hardware. Stainless steel turnbuckles offer
the highest resistance to high chloride or high moisture
environments.
Pipe - pipe turnbuckles are a version of
stainless steel manufacturing but the body of the turnbuckle is
enclosed in stainless steel pipe for cosmetic reasons such as wire
railings so that threads are not visible unlike standard turnbuckle
hardware. UNC threaded so the fittings can be interchanged with
standard turnbuckle fittings.
Galvanized Turnbuckles - hot dip galvanized
steel for durability, resistance to corrosives, and weather
resistance. Made for in-line or straight pull applications
only.
Option of Turnbuckle:
However, the most prevalent choice is a sleeve with screwed
connections of opposite hands (left and right) at each end so that
by turning the sleeve, the connected parts will be drawn together,
taking up slack and producing tension.
•Deck Toggle - a "T" shaped bar sits inside a mounting bracket with
holes on either side. This configuration allows the turnbuckle
assemblies to rotate **0 degrees within the mounting bracket. This
type of fitting is often used to attach to deck posts.
•Drop Pin - these turnbuckle tie downs have a rotating pin on the
end that flips flat into the body of the pin to thread through a
hole and then can be extended perpendicular to the body for a
secure hold. This end fitting offers an excellent clean look. •Eye
- solid loop end for wire rope turnbuckle with no vulnerable
connection points to allow cable to slip through. Elongated eye
version minimizes stress on the turnbuckle component.
•Fork or Jaw -rigging turnbuckles with wishbone shaped anchor point
fitted with a nut and bolt or pin and cotter turnbuckle assembly,
this type of fitting is ideal for situations where the anchor point
is fixed and will not work with an eye or the anchor point needs to
be secured from slipping off the fitting.
•Hook - stainless turnbuckle ending in an open hook. Hooked ends of
the turnbuckle may open the same direction or in opposite
directions depending on your rigging requirements. This fitting
offers the quickest option for attachment and release. •Lag Screw -
the threaded screw end of these turnbuckles allow for permanent,
secure attachment to your anchor points.
•Stub End - these rigging turnbuckles are used where a connecting
point is not needed like most turnbuckle ends, but rather are used
to separate or push apart objects. •Swage Stud - swage stud turn
buckle fittings offer a solid corrosion resistant end point that is
threaded to accept wires directly into the fitting and swaged to
secure them permanently.
•Threaded Rod - turnbuckle hardware end fitting with standard
threads that easily form a direct connection to a post or other
mounting surface.
Application of Turnbuckle
1. Mining
2. Marine Application
3. Crane Operation
4. Electronic power
بلد: |
China |
نموذج رقم: |
10.67318.1900
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
- |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
- |
نوع الدفع: |
- |
مجموعة المنتج : |
- |