Used Lubricant Oil Recycle Machine

سعر فوب

أحصل على آخر سعر

( Negotiable )

1 Set Minimum Order

بلد:

China

نموذج رقم:

DIR

سعر فوب:

( Negotiable )(قابل للتفاوض) أحصل على آخر سعر

الموقع:

China

سعر الحد الأدنى للطلب:

الحد الأدني للطلب:

1 Set

تفاصيل التغليف:

packed in strong wooden case, it is suitable for long distance transport

موعد التسليم:

40 workdays

القدرة على التوريد:

100 Set per Year

نوع الدفع:

L/C, T/T

مجموعة المنتج :

lubrication oil purifier

الاتصال الآن

Chongqing Tongrui Fliteration Manufacturing Co., Ltd.

China

عضو مجاني

الشخص الذي يمكن الاتصال به Ms. Clary

Huzhu Industrial Park, Baqiao, Dadukou District , Chongqing, Chongqing

الاتصال الآن

الوصف

used lubricant oil recycle machine

Because the waste oil contain too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. and due to the traditional technology only can refine the waste oil to base oil, can't use directly, so our company is researching the new technology about distilling equipment, which can distill all kinds of waste oil into clean oil, easy to operation, and the lower operation cost.

1.Working principle of used lubricant oil recycle machine

This equipment adopt physicochemical actions to polymerize, passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regeneration the Waste oil to clean oil, save the component of the oil.

2. Advantage of used lubricant oil recycle machine

It's easy to produce waste residue and bad smelling by traditional vitriol distilling, which will bring potential secondary pollution, moreover, it's easy to change the color to black and produce the odor due to the recycled oil react with the oxygen. But after we use the alkaline complex catalyst refines the oil, the recycled oil haven't change the color and haven't create the odor. What's more important, you can use the resid to be as the fuel to heating the oil, without any pollution. And the equipment is easy to operate, only **2 workers can control the equipment.

3. Main components of used lubricant oil recycle machine

a. Catalyst system: Catalyst Reactor, blender;

b.. Chemistry treatment system: Chemistry reactor, blender,oil pump

c. Heating distilling system: distilling tower, distilling kettle, heater, circle pump;

d. Cooling system: refrigerating equipment, water pump, water tank, cooler I,cooler II, Condenser;

e. Vacuum system: Vacuum water receiver, vacuum pump, vacuum cooler

f. Degasification system: vacuum exhauster, exhaust fan, degasification plant, water pump, radiator,deodorizer.

g. oil storage system: distilling storage tank

h. Control system: all kinds of gauge( vacuum gauge, pressure gauge etc.) and electricity controller tank

4. Working Principle of used lubricant oil recycle machine

A proposal for processing waste lube oil and industrial oils, using high vacuum distillation technology is presented here. The various steps involved in the projects are given below.

Step1: The waste oil is pre-treated and then send to chemical processing kettle and react with catalyst.

Step2: This waste oil is approx **0 degree at 0.**8Mpa to have water and some light fractions separated.

Step3: The temperature is keep rising up to ******0degree at **0Pa , the lighter fractions such as gasoline, diesel are distilled and cooled and then stored in diesel receiving tank.

Step4: The undistilled waste oil subjected to high vacuum, medium temperature in the heated distillation plant, the light base oil fraction is distilled and cooled and then collected in the light base oil tank( above **0degree and at a pressure of **0Pa). The distilled oil will have a viscosity of higher than SN**0 at ambient.

Step 5: The undistilled waste oil subjected to high vacuum, high temperature in distillation plant, the heavy base oil fraction is distilled and cooled and then collected in the base oil tank ( above **0degree and at a pressure of **0Pa). Distilled oil approximately higher than SN**0 in viscosity).

Step6: The distilled oils are clean oil generally no need further treatment, they are going to be blended with additives to get finished oils for the automotive and industrial applications.

Step7: The final residue is semi solid at ambient and can be processed for manufacturing asphalt, finished to make off-speck heavy fuel oil or to make greases for slow moving equipment.

5. Features

1. Easy to operate, low operation cost

2. Environmentally friendly, without secondary pollution.

3. The equipment can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.

4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.

5. Low cost contain:

1) only need the catalyst chemical, the cost is less than US$*0 to refine one ton waste oil.

2) Heat consumption: **5 kcal per ton waste oil

3) Power consumption: *0Kwh to recycle 1 ton waste oil

6. High degree of automation.

The detail of recycled light oil and heavy oil
item	Heavy base lube oil	Light base lube oil
appearance	lucidity	lucidity
color ≤	1.5	1
Viscosity(*0degree)mm2/s	9.7	6.6
Viscosity index ≥	*6	*5
anti- oxidation **0degree, min ≥	**0	**0
de-emulsification, 5degree, min	5min	5min
Flash point (opening)degee ≥	**8	**4
Pour point degree ≤	**2	**6
Neutralization value mgKOH/g ≤	0.*2	0.*2

بلد:	China
نموذج رقم:	DIR
سعر فوب:	( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
الموقع:	China
سعر الحد الأدنى للطلب:	-
الحد الأدني للطلب:	1 Set
تفاصيل التغليف:	packed in strong wooden case, it is suitable for long distance transport
موعد التسليم:	40 workdays
القدرة على التوريد:	100 Set per Year
نوع الدفع:	L/C, T/T
مجموعة المنتج :	lubrication oil purifier