Shanghai Metalforming Machine Co., Ltd.

Spiral Air Duct Forming Machine: Tube Forming Diameter 85mm-1500mm Maximum Tube Length 500-8000mm( or infinity )

ATM-300 Technical Terms: (7- corrugation ridge) 1 forming diameter:45~150mm 2 pipe length:500~2000mm 3 thickness:0.06~0.2mm 4 strip wi

Rectangular duct roll forming line-3 1---WORKING PROCESS Decoiler-metal feed-leveler grooving roll--punch --folder--cut to length -with pittsburgh

Hydraulic Oval Duct Making Machine Main technical data Max Sheet Thickness: 1.2mm Max. Tube Length: 3m Easier to install: 330~1500mm

The machines use for Pittsburgh seam, C-cleat, S-cleat and single seam, mainly use for HVAC duct making.

The W11 series three roller bending machine utilize a special construction, and with two motors .when it works, the upper roller can be moved to up an

Introduction Of SB-C300A It is composed of uncoiler, leveling machine, roll forming machine and hydraulic cutting system. A. Main technical paramet

Type: FN-35/FN-50/FN-75/FN-100/FN-125/FN-160 Rated Capacity: 35KVA/50KVA/75KVA/100KVA/125KVA/160KVA Rated Input Current: 92 A/131 A/197 A/263 A/3

All the machines use for round ducts beading making and elbow seam lock Every machines with seven rollers, four use for elbow seam making and seam

APP08Air drive riveting machine 1. Pressure, 8ton 2. Punch Distance, 100mm 3. Riveting distance, 6mm 4. Air source 2-7kgf/cm2, flowing, 0. 6m3/min

auto slitter line2X1600 1.Main motor power: 7.5KW( speed can be adjust) 2.Slitter speed 5m-25m/min 3.Material thickness:stainless steel0.2 1.0mm,

MACHINE SIZE Length, width, height Un-coiler : 1200X1200X1300 Main machine 3300X600X1100 Flying saw cutter and out table 1800X800X1300 Main data:

Our skillful spiral tube forming machine can make the tubes in the dim. Area of 85 mm to 1500 mm. It even can make the tubes in diameters 86mm, 87mm,

Mainly specification 1, Full Length 27. 3 m 2, feding motor 4KW 3, Main motor 27KW 4, hydraulic pressure 11MPa 5, Shaft diameter 90mm 6, Profi

----thickness 0.5mm to 1.2mm ----hydraulic station: Motor:5.5kw,380volt,3-phase Oil pump 23Mpa, 6L/per minuter

ATM-300 Technical Terms: (7- corrugation ridge) 1 forming diameter:50~300mm 2 pipe length 500~2000mm(no limit, it can make any length ) 3 thick

To meet market's need, We use world techniques to develop the plasma. Machine series. The plasma-cutting machine are of two types. The ACL-5000 an

TDF flange machine produce both transverse duct snap flange and the correspongding duct ***** technical dada of T-12DC and T-15DC is listed bellow. T