Dspunches

The punch with a centred bevel that requires the die maker to use a suitable ejection material. The centre bevel punch tube is robust and durable, t

The side ejection punch tube is ideal for tougher materials and some plastics where other forward ejection punches are not strong enough.

Pin ejection punch tubes are available in centre bevel (order on this page) and with an inside bevel, the brass pin is tensioned by a fundamental inte

The punch with a centred bevel that requires the die maker to use a suitable ejection material. The centre bevel punch tube is robust and durable, th

Label punch tubes have very sharp cutting edges and high height tolerances, used for kiss cutting material. Available with or without spring Typical h

Characteristic: 1.Single hardness HV430 2.Square teeth 3teeth/1' 4teeth/1' 6teeth/1' 8teeth/1'(1:1) 10teeth/1' 12teeth/1' 16te

Characteristic: 1.Abrasive machining sharp knife edge 2.Two class hardness body hardness HV280, core hardness HV410 3.Two type:

Characteristic: 1.Three class hardness, body hardness HV280.core hardness HV380, edge hardness HV600 2.Used for spacers, plastic, fibre and so on. the

Self eject punch with a centre bevel (also available with an inside bevel), the springs are ground flat with the axis with a closed end to prevent the

Cup Punches are made of solid rod. When these punches cut, the stock is forced into the cup and the compression acts as its own ejector.Cups can be us