Englang Intetia International Trading Limited

Adhesive series for chip ceramic components Ceramic component molding adhesive materials are ceramic capacitors, ceramic inductors, ceramic buzzers, c

Conductive slurry includes slurry for electronic components such as disk capacitors, ferrite magnetic cores, NTC, buzzers, etc. We have a strong devel

Wetting dispersant Active ingredientcontent:50% Type of activeingredient:Anions Scattered types:De-flocculation Properties and application:Acidic low-

Wetting dispersant Active ingredientcontent:100% Type of activeingredient:Cation Scattered types:Conntrliied-flocculation Properties and application:I

Wetting dispersant Active ingredientcontent:100% Type of activeingredient:Anions Scattered types:De-flocculation Properties and application:Good wetti

Wetting dispersant Active ingredientcontent:100% Type of activeingredient:Anions Scattered types:De-flocculation Properties and application:Ammonium s

Butvar PVB , the manufactued by EASTMAN which locate in America, with a long history , applied in film formation for laminated glass, coating , ink, c

Butvar PVB , the manufactued by EASTMAN which locate in America, with a long history , applied in film formation for laminated glass, coating , ink, c

Sulruol GL06 is a PVB resin produced in Mainland China. The products are used in various applications such as ceramic base adhesive, electron flux pa

Sulruol GM15 is a PVB resin produced in Mainland China. The products are used in various applications such as ceramic base adhesive, electron flux pas

Prefere melamine resins , which is well known as INEOS melamine resins formerly, has a long history. The products are used as a curing agent in bakin

INTETIA has a wide range of melamine resins with various etherification types and degrees, which are used as curing agents in baking coatings and inks

INTETIA MF-603 is a metal adhesion promoter based on a silyl alcohol modified compound used in steel and coil aluminum coatings, mg-NI, mG-al coatings

FYL-9350 is a methanol highly etherified amino resin produced in mainland China with high solids content. Used as curing agent in baking coatings, ink

Melamine FYL-1157 is a methanol/n-butanol highly mixed etherified amino resin produced in mainland China, with a methoxy:butoxy ratio (molar ratio) of

NV:74-78% solvent: iso-B Viscosity:1500-6500mPa.s DP: 1.7 Type/Ether:Tri-Me Sulroul MI1250used in various applications such aswater-based automobile

NV:>97% solvent: no solvent Viscisity:3500-16000 mPa.s DP:1.6 Type/Ether: Hexa-Me Sulruol MI1280 can be applied to water-based automobile intermediate

NV: 83-87% solvent: iso-B Viscisity:6500-20000 mPa.s DP:1.6 Type/Ether: Tri-Me SulruolMI12460can be applied to water-based automobile intermediate

NV:>92% solvent: no solvent Viscisity:2500-56000 mPa.s DP:1.7 Type/Ether: Hexa-Me Sulruol MI1283 can be applied to water-based automobile intermediate

NV: 70-74% Solvent: nB Viscosity: 800-3800 mPa.s DP: &n...

NV:74-78% solvent: iso-B Viscosity:1500-6500 mPa.s DP:1.7 Type/Ether: Tri-ME Melamine IAMEL 917isa trimethyletherified amino resin, which has good co

NV: 76-80% solvent: nB Viscosity: 3500-9000 mPa.s DP: 1.7 Typ...

NV: 83-87% solvent: iso-B Viscosity: 6500-20000 mPa.s DP: 1.7 Type/Eth...

NV: >97% solvent: no-solvent Viscosity: 3500-16000 mPa.s DP: 1.6 Typ...

NV: >92% solvent: no-solvent Viscosity: 2500-15000 mPa.s DP: ...

NV: >97% Solvent: no-solvent Viscosity: 500-3000 mPa.s DP: &...

Product Description Introduction *Classic dual-frequency design, curved box, front and rear large R angle design. *The wooden case is made of 18MM an

NV:54-56% solvent: Methylol-iB Viscosity: 260-460 mPa.s DP:2.2 Maprenal MF590 is used in water-based automobile intermediate coating, topcoat, bicycl

NV:>97% solvent: no solvent Viscosity: 1760-4630 mPa.s DP: 1.4 Resimene 747is used in water-based automobile intermediate coating, topcoat, bicycle t

NV:54-56% solvent: Tetra-iB Viscosity: 300-500 mPa.s Maprenal MF650is used in water-based automobile intermediate coating, topcoat, bicycle topcoat,

NV:84-87 % solvent: WA Viscosity: 3000-700 mPa.s DP:1.3 Application:Can coating / Coil coating More than 20 years of experience in melamine resins ar

NV:78-82 % solvent: nB Viscosity: 5000-10000 mPa.s DP:1.40 Type/Ether:Tri-nB Application:Can coating More than 20 years of experience in melamine res

NV:68-72 % solvent: nB Viscosity: 900-2400 mPa.s DP:1.65 Type/Ether:Tetra-nB Application:Automotive coatings More than 20 years of experience in mela

NV:78-82 % solvent: nB Viscosity: 3300-10700 mPa.s DP:1.60 Type/Ether:Tri-nB Application:Automotive coatings More than 20 years of experience in mela

NV:>96 % solvent: no solvent Viscosity: 2270-4730 mPa.s DP:1.90 Type/Ether:Penta-Me/nB=75/25 Application:Automotive coatings More than 20 years of ex

Product Description Introduction *The case is made of aluminum alloy CNC finish machining. Aluminum alloy electronic tube protective cover. *Pure

NV:83-87% solvent: iso-B Viscosity: 6500-20000 mPa.s DP:1.7 Type/Ether: Hexa-ME/nB=55/45 Resimene 755 is used in water-based automobile intermediate

NV:>98% solvent: no-solvent Viscisity: 3800-10200 mPa.s DP:1.2 Resimene CE8824 is used in water-based automobile intermediate coating, topcoat, bicyc

NV:70-74% solvent: nB Viscosity:800-3800mPa.S Dp:1.6 Type/Ether:Tri-nB Sulruol MI1021 can be applied to water-based automobile intermediate coating,

Wetting dispersant Active ingredientcontent:60% Type of activeingredient:Non-ionic Scattered types:De-flocculation Properties and application:Water-oi