سعر فوب
أحصل على آخر سعر6.23 ~ 7.5 USD / Kiloampere
|200 Kilogram Minimum Order
بلد:
China
نموذج رقم:
HY630
سعر فوب:
6.23 ~ 7.5 USD / Kiloampere أحصل على آخر سعر
الموقع:
-
سعر الحد الأدنى للطلب:
6.23 per Kiloampere
الحد الأدني للطلب:
200 Kilogram
تفاصيل التغليف:
Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail
موعد التسليم:
3days
القدرة على التوريد:
8 Ton per Day
نوع الدفع:
Western Union, L/C, T/T
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Ms. Judy
buildingA,NO.3,hongling first road,liulian shibi, pingdi street,long gang district,shenzhen,chiana, Shenzhen, Guangdong
Hongye HY-E**2 Addition
Molding Silicone for life casting
copied
HY-E**2 Addition Molding Silicone for gypsum casting copied Applications,
HY- E**2# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
HY-E**2 Addition Molding Silicone for gypsum casting copied Description
HY- E**2# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Technique Data of HY-E**2 Addition Molding Silicone for gypsum casting copied:
|
Model |
HY-E**2# |
|
Appearance |
Translucent |
|
Mixing Ratio |
1:1 |
|
Operating time (Mins *5°C) |
*0 - *0 |
|
Curing time (Mins *5°C) |
**0 - **0 |
|
Curing time (Mins *0°C) |
*0 - *0 |
|
Hardness (A°) |
*2±2 |
|
Density ( g/cm 3 ) |
1.*8 |
|
Viscosity (CS) (Part A) |
****0 ± ***0 |
|
Viscosity (CS) (Part B) |
***0 ± **0 |
|
Viscosity (CS) (After mixed) |
****0 ± ***0 |
|
Tensile-strength( kgf /cm2 ) |
**0 ± *0 |
|
Tear-strength (kgf /cm2 ) |
*5 ± 2 |
|
Elongation-break(%) |
**0 ± *0 |
|
Retractility(%) |
≤0.1 |
OPERRATING INSTRUCTION of HY-E**2# molding silicone:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about **4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
HY-E**2 Addition Molding Silicone for gypsum casting copied SHELF LIFE:
Twelve (*2) months from date of shipment when stored at *4°C in original unopened packages.
Contations on HY-E**2 Addition Molding Silicone for gypsum casting copied:
Any more information , please fell free to contact with Miss Judy
Mobile: **6**89****6****1 Tel: **6***5****4**0*3 Fax: **6***5****4****0 E*mail: hyja(at)szrl(dot)net **********1(at)qq.com MSN: hyjjudy(at)hotmail(dot)com SKYPE: judy.zhao**3 Website: ww*w(dot)szrl(dot)net
Y-E**2 Addition Molding Silicone for gypsum casting copied
| بلد: | China |
| نموذج رقم: | HY630 |
| سعر فوب: | 6.23 ~ 7.5 / Kiloampere أحصل على آخر سعر |
| الموقع: | - |
| سعر الحد الأدنى للطلب: | 6.23 per Kiloampere |
| الحد الأدني للطلب: | 200 Kilogram |
| تفاصيل التغليف: | Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail |
| موعد التسليم: | 3days |
| القدرة على التوريد: | 8 Ton per Day |
| نوع الدفع: | Western Union, L/C, T/T |
| مجموعة المنتج : | - |
