Beijing Jinmuyu Electronics Co., Ltd

Model: JMY**0A 1. Product introduction JMY**0A is a RFID read/write module with an UART/IIC/RS**2C serial po

The module and antenna are separate design. 4 wires are linked the antenna and module. Normally the wire shoul

***** JMY**1C is a RFID read/write module with an UART and IIC serial port. The module supports ISO/IEC****3A

Mifare Classic 4K White PVC Cards MIFARE Classic 4K with 4 Kbytes of EEPROM read/write memory and is compati

The series of MR**1 RF reader make use of PHILIPS&#*9;s SL RC**0; MF RC**0; MF RC**1 and CL RC**2 for PCD, Its

The function and MR**1 are self-same, add 8 bytes LED, the real-time clock available, can show time, **2K byte

The series of MR**1 RF reader make use of PHILIPS&#*9;s SL RC**0; MF RC**0; MF RC**1 and CL RC**2 for PCD, Its

JMY**3 is the high performance and low-power dissipation RFID Module. The module and antenna are separate desi

1.Product introduction JMY**0G is a RFID read/write module with an UART/IIC/RS**2C serial port. The module ha

***** JMY**1G is a RFID read/write module with an UART and IIC serial port. The module supports ISO/IEC****3

Model: JMY**1H ***** JMY**1H is a RFID read/write module with an UART and IIC serial port. The module suppor

***** JMY**1A is a RFID read/write module with an UART and IIC serial port. The module supports ISO/IEC****3A

***** JMY**4L is a RFID read/write module with an UART and IIC serial port. The module supports the Mifare ca

1.Product introduction JMY**0M is a RFID read/write module with an UART/IIC/RS**2C serial port. The module ha

***** JMY**1M is a RFID read/write module with an UART and IIC serial port. The module supports the Mifare ca

JMY**4 series are the high performance and low cost RFID Module. And the module and antenna are separate desig

MR**1UG is the RFID Card reader with USB HID interface. DC 5V power. **0mm reading distance. ISO****3 protocol

Model NO.: JMY**1H Protocol: ISO****3A+ISO****3B+ISO****3 PCD model: NXP CL RC**2 Working frequency: *3.*6M

Model NO.: JMY**0H Protocol: ISO****3A+ISO****3B+ISO****3+ISO***6 Antenna: Built in PCD model: NXP CL RC**2

Model NO.: MR**1UH/SHK RF Chip: NXP CL RC**2 Working Frequency: *3.*6MHz RF Standard: ISO****3A, ISO****3B,