gyratory vibrating screen , vibrating sieve machine

الوصف

1) All components are easily accessible and removable for ease of disassembly and cleaning.– *2 months).

2) No vertical vibration, longer life span of mesh (6 – *2 months).

3) Each layer is installed an anti-blocking and cleaning facility and able to clean mesh while sieving.

4) Exterior is designed for easy cleaning. Exterior permanent joints are either welded continuously, or strip welded and filled with epoxy.

5) Lower headroom permits operation in confined areas, reducing cost of building and maintenance.

6) Conveying equipment is less required for elevating material to the feed point.

 

The unique gyratory motion imparts a combination of actions to the material as it passes along the screen surface. It begins with a horizontal circular motion at the feed end, gradually diminishing along the length of the machine to an elliptical path, and finally to an approximate straight-line motion at the discharge end. There is no vertical component to this motion thus keeping the material in constant contact with the screen surface.

The gyratory motion at the feed end of the machine immediately spreads the material across the full width of the screen surface to maximize screen utilization even though the feed is from a single point. At the same time, this motion stratifies the material, causing the fines to sink down against the screen surface. The particles that are appreciably smaller than the openings quickly pass through at this part of the screen.As the circular motion diminishes into an elliptical path, the gentle near-horizontal motion causes the fine particles closer in size to the screen mesh the near-size particles to fall through the mesh openings.The nearly linear reciprocating motion at the discharge end of the Gyratory Screener removes those particles closest in size to the mesh openings while gently conveying the oversize material off the screen.