الوصف
PSA zeolite Molecular Seive Oxygen Generator
Our company specialize in
making various kinds of compressors, such as:Diaphragm
compressor,Piston compressor, Air compressors,Nitrogen
generator,Oxygen generator ,Gas cylinder,etc. All products can be
customized according to your parameters and other
requirements.
Working
principle
After being compressed by an air
compressor, the raw air enters the air storage tank after dust
removal, oil removal and drying, and then enters the A adsorption
tower through the A intake valve. At this time, the tower pressure
rises, the nitrogen molecules in the compressed air are adsorbed by
the zeolite molecular sieve, and the unadsorbed oxygen passes
through the adsorption bed and enters the oxygen buffer tank
through the outlet valve. This process is called adsorption. After
the adsorption process is over, the adsorption tower A and the
adsorption tower B are connected through a pressure equalizing
valve to balance the pressure of the two towers. This process is
called equalizing pressure. After the pressure equalization is
over, the compressed air passes through the B intake valve and
enters the B adsorption tower, and the above adsorption process is
repeated. At the same time, the oxygen adsorbed by the molecular
sieve in the adsorption tower A is decompressed and released into
the atmosphere through the exhaust valve A. This process is called
desorption, and the saturated molecular sieve is adsorbed and
regenerated. Similarly, the right tower is also desorbed when tower
A is adsorbing. After the adsorption of Tower B is completed, it
will also enter the pressure equalization process, and then switch
to the adsorption of Tower A, so that the cycle alternates and
continuously produces oxygen. The above-mentioned basic process
steps are all automatically controlled by PLC and automatic
switching valve.
Technical
characteristics
1. Equipped with air pretreatment equipment such as
refrigeration dryer, which effectively guarantees the service life
of molecular sieve.
2. Using high-quality pneumatic valve, short opening and
closing time, no leakage, service life of more than 3 million
times, meeting the requirements of frequent use of pressure
swing
adsorption process, and high reliability.
3. Using PLC control, it can realize fully automatic
operation, convenient maintenance, stable performance and low
failure rate.
4. The gas production and purity can be adjusted within an
appropriate range.
5. Continuously optimized process design, combined with the
selection of new molecular sieves, minimizes energy consumption and
capital investment.
6. The device is assembled in a complete set to reduce on-site
installation time and ensure quick and easy on-site
installation.
7. Compact structure design, less floor space.
How to get quote
:
1.Flow : _________Nm3/h
2.Inlet pressure : _____Bar
3.Exit Pressure :____Bar
4.Gas Medium :____
5.Voltage and Frequency : ________V/PH/HZ
| بلد: |
China |
| نموذج رقم: |
-
|
| سعر فوب: |
10000 ~ 100000 / Set ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
China |
| سعر الحد الأدنى للطلب: |
10000 per Set |
| الحد الأدني للطلب: |
1 Set |
| تفاصيل التغليف: |
Wooden Box |
| موعد التسليم: |
30 to 50 days |
| القدرة على التوريد: |
500 Set per Year |
| نوع الدفع: |
T/T, L/C |
| مجموعة المنتج : |
Oxygen generator
|
