telecom outdoor Dynamic environmental monitoring system for communication base station

الوصف

1.Overview

This is a small high-reliability environment monitoring unit developed to provide environment/device control
The monitoring unit monitors important environmental factors such as temperature, humidity, smog, water penetration,
collected by a sensor exceeds the preset threshold, an alarm is sent through the LCD, buzzer, or system log.
Through a preserved custom interface (optional), the unit can be connected to another sensor in main contact point
 

2.Features

W-TEL monitoring unit is designed for the outdoor cabinet application. It height is 1U*2U and suitable for standard **-inch rack mounting. Front cabling, friendly installation, greatly facilitating testing, field commissioning and remote monitoring to all sensors for customers.

2>*-channel temperature detection can sense temperatures of the main equipment cabin and battery cabin respectively

4>Optional Chinese/English display module facilitates parameter checking and setting on site

6>With operating indicator, alarm indicator, and buzzer

8>Setting the LED in the cabinet to on/off when opening/closing the door through the access control function

*0>The main equipment offers standard isolated RS**2/RS**5/RS**2 communication interfaces for direct connection to wired or wireless MODEM, and supports Ethernet, optical fiber, E1 and other interfaces via optional conversion interfaces

3.Product Appearance

It is used to power on/off the device.

This device can be powered by AC or DC power supply.
DC voltage range: *0 VDC to *0 VDC

It displays sensor status data and parameter configuration pages.

They are used together with the LCD for menu page up/down and parameter settings.
DOWN: — Go to the next page up (when viewing), or decrease the parameter value (when setting);
5) LEDs
Power LED: — It indicates that the device is powered on and running;
Major alarm: — It indicates a major alarm.

Four current-type analog ports, with *2 VDC power ports connected to temperature, or temperature and
Eight switch (dry contact) ports, three of which with *2 VDC power ports connected to access control,
7) Dry contact (relay) output interfaces
startup/close-down.
Ports O1 to O4 output switch signals;
8) RS**5/RS**2/Ethernet interfaces
RS**5/RS**2 multiplex port that can be set to work in either RS**5 or RS**2 mode.
Ports A and D are used to connect the remote computer or alarm center device;
switch power, air conditioners, heat exchangers, and temperature and humidity sensors. (Note: Transparent data
standard communications protocols.)