الوصف

Specefications
Model                                     RY-F**0H with Fiber Holders
Applicable fibers                  SM (ITU-T G.**2), MM (ITU-T G.**1), DS (ITU-T G.**3), NZDS (ITU-T G.**5)
Fiber cleaved length            *0 ~*6mm (Coating diameter<**0µm);*6mm(Coating diameter**0~***0µm)
Fiber diameter                      Cladding diameter:*0 ~**0µm , Coating diameter:**0 ~***0µm
Auto focusing                        Available
Fiber aligning method         Core aligning, clad aligning, manual aligning
Average splice loss              0.*2dB (SM), 0.*1dB (MM), 0.*4dB (DS), 0.*4dB( NZDS)
Splicing time                         Typical 9 sec,with standard SM fiber
Heating time                          Typical *6 sec
Applicable sleeves               *0mm, *0mm and a series of micro sleeves
Tension test                            2N(option)
Electrode life                           ***0
Battery capacity                       Typical **0 cycles (splice and heat)
Monitor                                     5.1 inch TFT color monitor
Terminal                                   USB 1.1 and VGA ,   software upgrade via USB interface
Operating condition                                0 ~ ***0m above sea level, 0 ~ *5%RH and **0~*0oCC, respectively, Max. wind velocity of *5m/s
Splicing mode                                           Auto ,normal
Fiber cleaved angle threshold set         0.1 ~ *0.0 oC , 0.1oCstep
Power supply                                    Li-battery *1.8V  , AC******0V  DC*2.6V/5.0A
Dimension                                        L**9*W**2*H**5mm
weight                                                 2.4kg   2.9kg(battery)